65M-5011M-CT-T
ioPAC 6500 Series (65M) Switch Modules

ioPAC 6500 L2 managed switch module with 2 100/1000 fiber ports, 8 10/100/1000 Ethernet ports, -40 to 75°C operating temperature, conformal coating

Ethernet Interface

  • 10/100/1000BaseT(X) Ports (RJ45 connector)

    • 8
      Auto MDI/MDI-X connection
      Auto negotiation speed
      Full/Half duplex mode

  • 100/1000BaseSFP Slots

    • 2

  • Standards

    • IEEE 802.3 for 10BaseT
      IEEE 802.3u for 100BaseT(X)
      IEEE 802.3ab for 1000BaseT(X)
      IEEE 802.3z for 1000BaseX
      IEEE 802.3x for flow control
      IEEE 802.3ad for Port Trunk with LACP
      IEEE 802.1Q for VLAN Tagging
      IEEE 802.1D-2004 for Spanning Tree Protocol
      IEEE 802.1w for Rapid Spanning Tree Protocol
      IEEE 802.1p for Class of Service
      IEEE 802.1X for authentication
Ethernet Software Features

  • Management

    • IPv4/IPv6
      Flow control
      Back Pressure Flow Control
      DHCP Server/Client
      ARP
      RARP
      LLDP
      Port Mirroring
      Linkup Delay
      SMTP
      SNMP Trap
      SNMP Inform
      SNMPv1/v2c/v3
      RMON
      TFTP
      SFTP
      HTTP
      HTTPS
      Telnet
      Syslog
      Private MIB
      Fiber check

  • Filter

    • GMRP
      GVRP
      GARP
      802.1Q VLAN
      IGMP Snooping v1/v2/v3
      IGMP Querier

  • Redundancy Protocols

    • STP
      RSTP
      Turbo Ring v2
      Turbo Chain
      Ring Coupling
      Dual Homing
      Link Aggregation

  • Security

    • Broadcast storm protection
      Rate Limit
      Trust access control
      Static Port Lock
      Sticky MAC
      HTTPS/SSL
      SSH
      RADIUS
      TACACS+
      Login and Password Policy

  • Time Management

    • SNTP
      NTP Server/Client
      NTP Authentication

  • Protocols

    • IPv4/IPv6
      TCP/IP
      UDP
      ICMP
      ARP
      RARP
      TFTP
      DNS
      NTP Client
      DHCP Server
      DHCP Client
      802.1X
      QoS
      HTTPS
      HTTP
      Telnet
      SMTP
      SNMPv1/v2c/v3
      RMON
      Syslog

  • MIB

    • P-BRIDGE MIB
      Q-BRIDGE MIB
      IEEE8021-SPANNING-TREE-MIB
      IEEE8021-PAE-MIB
      IEEE8023-LAG-MIB
      LLDP-EXT-DOT1-MIB
      LLDP-EXT-DOT3-MIB
      SNMPv2-MIB
      RMON MIB Groups 1, 2, 3, 9
Switch Properties

  • MAC Table Size

    • 16 K

  • Jumbo Frame Size

    • 9.216 KB

  • Max. No. of VLANs

    • 256

  • VLAN ID Range

    • VID 1 to 4094

  • IGMP Groups

    • 512

  • Priority Queues

    • 4

  • Packet Buffer Size

    • 1 MB
Serial Interface

  • Console Port

    • RS-232 (TxD, RxD, GND), 8-pin RJ45 (115200, n, 8, 1)
Input/Output Interface

  • Buttons

    • Reset button

  • USB Ports

    • USB 2.0 Type A
      (only supports Moxa's ABC-02-USB backup and storage device)
Power Parameters

  • Input Current

    • 0.9 A @ 12 VDC
Physical Characteristics

  • Housing

    • Plastic

  • Dimensions

    • 42 x 177 x 131.5 mm (1.65 x 6.97 x 5.18 in)

  • Weight

    • 660 g (1.46 lb)

  • Installation

    • DIN-rail mounting
      Rack mounting (with optional kit)
Environmental Limits

  • Operating Temperature

    • -40 to 75°C (-40 to 167°F)
      (with SFP module installed)
      Note: Proper airflow is required in an environment with temperature > 65°C

  • Storage Temperature (package included)

    • -40 to 85°C (-40 to 185°F)

  • Ambient Relative Humidity

    • 5 to 95% (non-condensing)

  • Altitude

    • 2000 m Please contact Moxa if you require products guaranteed to function properly at higher altitudes.
Standards and Certifications

  • EMC

    • EN 55032/35
      EN 61000-6-2/-6-4

  • EMI

    • CISPR 32, FCC Part 15B Class A

  • EMS

    • IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
      IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
      IEC 61000-4-4 EFT: Power: (DC) 1 kV; Signal: 1 kV
      IEC 61000-4-5 Surge: Power: (DC) 0.5 kV L-N, 1 kV L/N-PE; Signal: 1 kV; IO: 0.5 kV
      IEC 61000-4-6 CS: Power: Power: (DC) 10 V; Signal: 10 Vrms
      IEC 61000-4-8 PFMF: 30 A/m

  • Safety

    • UL 61010-2-201
      UL 61010-1

  • Shock

    • IEC 60068-2-27
      Half sine wave; acceleration: 15 g; time: 11 ms

  • Vibration

    • IEC 60068-2-6
      DIN-rail mounted:
      7 mm peak-peak (p-p) (2 to 8.42 Hz), 1 g (8.42 to 150 Hz)
      Rack mounted (with optional kit):
      7 mm peak-peak (p-p) (2 to 8.42 Hz), 0.5 g (8.42 to 150 Hz)

  • Package Vibration Test

    • ISTA 1A

  • Package Drop Test

    • ISTA 1A
MTBF

  • Time

    • 3,104,403 hrs

  • Standards

    • Telcordia Standard SR-332
Warranty