--
-- *****************************************************************
-- Moxa ioPAC 6500 MIB
--
-- 08-19-2025
--
-- Copyright (c) 2025 by Moxa Automation Co., Ltd.
-- All rights reserved.
-- *****************************************************************
--

MOXA-IOPAC6500-MIB DEFINITIONS ::= BEGIN
    IMPORTS
        OBJECT-TYPE, NOTIFICATION-TYPE, MODULE-IDENTITY,
        Integer32, enterprises, Gauge32, TimeTicks
            FROM SNMPv2-SMI
        TEXTUAL-CONVENTION, DisplayString, MacAddress
            FROM SNMPv2-TC;

-- 1.3.6.1.4.1.8691.10.6500
ioPAC6500 MODULE-IDENTITY
    LAST-UPDATED "202508140740Z"
    ORGANIZATION "Moxa Inc."
    CONTACT-INFO
      "Email: support@moxa.com
      Tel  : +886 2 89191230"
    DESCRIPTION "Module identity."

        REVISION        "202508140740Z"
        DESCRIPTION  "Auto-added revision to satisfy validator."
::= { dataAcquisitionAndControl 6500 }

OnOffTC ::= TEXTUAL-CONVENTION
    STATUS           current
    DESCRIPTION      "Generic digital on/off state."
    SYNTAX           INTEGER {
        off (0),
        on  (1)
    }

CpuModuleStateTC ::= TEXTUAL-CONVENTION
    STATUS           current
    DESCRIPTION      "CPU module state enumeration (from original MIB)."
    SYNTAX           INTEGER {
        powerOff        (0),
        startup         (1),
        linuxFailure    (2),
        serviceFaulure  (3),
        ready           (4),
        locate          (5),
        upgrade         (6),
        upgradeFail     (7)
    }

ModuleStateTC ::= TEXTUAL-CONVENTION
    STATUS           current
    DESCRIPTION      "General module state enumeration (from original MIB)."
    SYNTAX           INTEGER {
        powerOff        (0),
        startup         (1),
        startupFail     (2),
        diagnosticError (3),
        ready           (4),
        locate          (5),
        upgrade         (6),
        upgradeFail     (7),
        failsafe        (8),
        fieldPowerLost  (9)
    }

ModeSwitchTC ::= TEXTUAL-CONVENTION
    STATUS           current
    DESCRIPTION      "Represents device operation mode; values enumerate supported switch states."
    SYNTAX           INTEGER {
        run    (0),
        stop   (1),
        remote (2),
        unknown(3)
    }

RedundantStatusTC ::= TEXTUAL-CONVENTION
    STATUS           current
    DESCRIPTION      "Represents redundancy status of the module (active/redundant/fail conditions)."
    SYNTAX           INTEGER {
        start          (0),
        synchro        (1),
        cycleActive    (2),
        cycleStandby   (3),
        cycleStandalone(4),
        cycleError     (5),
        simulation     (6),
        bootupError    (7),
        shutdownActive (8),
        shutdownStandby(9),
        synchroError   (10),
        simulationStart(11),
        noLicense      (12)
    }

ApplicationStatusTC ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION  "Represents the runtime status of the control application.
                  run(0) process running; stop(1) process stopped;
                  remote(2) execution under external control/orchestration;
                  unknown(3) state cannot be determined."
    SYNTAX       INTEGER { run(0), stop(1), remote(2), unknown(3) }

EnableDisableTC ::= TEXTUAL-CONVENTION
    STATUS           current
    DESCRIPTION      "Represents a generic control state: disable(0) or enable(1)."
    SYNTAX           INTEGER {
        disable(0),
        enable (1)
    }


PwrSystemPowerFailTC ::= TEXTUAL-CONVENTION
    STATUS           current
    DESCRIPTION      "Represents system power status: normal(0) or systemPowerFail(1)."
    SYNTAX           INTEGER {
        normal         (0),
        systemPowerFail(1)
    }


PwrFieldPowerFailTC ::= TEXTUAL-CONVENTION
    STATUS           current
    DESCRIPTION      "Represents field power status: normal(0) or fieldPowerFail(1)."
    SYNTAX           INTEGER {
        normal        (0),
        fieldPowerFail(1)
    }


ExpPrevInterfaceTC ::= TEXTUAL-CONVENTION
    STATUS           current
    DESCRIPTION      "Represents the previously configured expansion interface type/state."
    SYNTAX           INTEGER {
        unknown(0),
        rf45   (1),
        sfp    (2)
    }


ExpPrevLinkStatusTC ::= TEXTUAL-CONVENTION
    STATUS           current
    DESCRIPTION      "Represents the previous link status of an expansion interface."
    SYNTAX           INTEGER {
        linkDown(0),
        linkUp  (1)
    }


DiModeTC ::= TEXTUAL-CONVENTION
    STATUS           current
    DESCRIPTION      "Represents configuration mode of a digital input channel."
    SYNTAX           INTEGER {
        di     (0),
        counter(1)
    }


DiagnosticErrorTC ::= TEXTUAL-CONVENTION
    STATUS           current
    DESCRIPTION      "Represents diagnostic status: none(0) or error(1)."
    SYNTAX           INTEGER {
        none (0),
        error(1)
    }


WireBreakTC ::= TEXTUAL-CONVENTION
    STATUS           current
    DESCRIPTION      "Represents wiring integrity: none(0) or wireBreak(1)."
    SYNTAX           INTEGER {
        none     (0),
        wireBreak(1)
    }


DiCounterStatusTC ::= TEXTUAL-CONVENTION
    STATUS           current
    DESCRIPTION      "Represents digital input counter status (e.g., idle/overflow/error)."
    SYNTAX           INTEGER {
        pause(0),
        run  (1)
    }


DiFieldCircuitSupplyLossTC ::= TEXTUAL-CONVENTION
    STATUS           current
    DESCRIPTION      "Represents field-circuit supply status: normal(0) or supplyLoss(1)."
    SYNTAX           INTEGER {
        none                  (0),
        fieldCircuitSupplyLoss(1)
    }


DoModeTC ::= TEXTUAL-CONVENTION
    STATUS           current
    DESCRIPTION      "Represents configuration mode of a digital output channel."
    SYNTAX           INTEGER {
        do   (0),
        pulse(1)
    }


ShortCircuitTC ::= TEXTUAL-CONVENTION
    STATUS           current
    DESCRIPTION      "Represents wiring condition: none(0) or shortCircuit(1)."
    SYNTAX           INTEGER {
        none        (0),
        shortCircuit(1)
    }


DoPulseStatusTC ::= TEXTUAL-CONVENTION
    STATUS           current
    DESCRIPTION      "Represents pulse output status of a digital output channel."
    SYNTAX           INTEGER {
        stop (0),
        start(1)
    }


DoCommonPowerLossTC ::= TEXTUAL-CONVENTION
    STATUS           current
    DESCRIPTION      "Represents DO common power status: normal(0) or powerLoss(1)."
    SYNTAX           INTEGER {
        none             (0),
        doCommonPowerLoss(1)
    }


RelayPulseModeTC ::= TEXTUAL-CONVENTION
    STATUS           current
    DESCRIPTION      "Represents pulse operating mode of a relay channel."
    SYNTAX           INTEGER {
        relay(0),
        pulse(1)
    }


RelayFailSafeActionTC ::= TEXTUAL-CONVENTION
    STATUS           current
    DESCRIPTION      "Represents configured relay failsafe action to apply on fault."
    SYNTAX           INTEGER {
        off     (0),
        on      (1),
        holdLast(2)
    }


AiUnderflowTC ::= TEXTUAL-CONVENTION
    STATUS           current
    DESCRIPTION      "Represents analog input underflow condition."
    SYNTAX           INTEGER {
        none     (0),
        underflow(1)
    }


UnderRangeTC ::= TEXTUAL-CONVENTION
    STATUS           current
    DESCRIPTION      "Represents analog input under-range condition."
    SYNTAX           INTEGER {
        none      (0),
        underRange(1)
    }


OverRangeTC ::= TEXTUAL-CONVENTION
    STATUS           current
    DESCRIPTION      "Represents analog input over-range condition."
    SYNTAX           INTEGER {
        none    (0),
        overflow(1)
    }


OverFlowTC ::= TEXTUAL-CONVENTION
    STATUS           current
    DESCRIPTION      "Represents analog input overflow condition."
    SYNTAX           INTEGER {
        none     (0),
        overRange(1)
    }


AiLoopPower1LossTC ::= TEXTUAL-CONVENTION
    STATUS           current
    DESCRIPTION      "Represents analog input loop power 1 status: normal(0) or powerLoss(1)."
    SYNTAX           INTEGER {
        none          (0),
        loopPower1Loss(1)
    }


AiLoopPower2LossTC ::= TEXTUAL-CONVENTION
    STATUS           current
    DESCRIPTION      "Represents analog input loop power 2 status: normal(0) or powerLoss(1)."
    SYNTAX           INTEGER {
        none          (0),
        loopPower2Loss(1)
    }


HartAiLoopPowerLossTC ::= TEXTUAL-CONVENTION
    STATUS           current
    DESCRIPTION      "Represents HART analog input loop power status: normal(0) or powerLoss(1)."
    SYNTAX           INTEGER {
        none         (0),
        loopPowerLoss(1)
    }


SiConfigModuleSlotIndexTC ::= TEXTUAL-CONVENTION
    STATUS           current
    DESCRIPTION      "Represents the configuration module slot index used across system configuration."
    SYNTAX           INTEGER {
        cpu1(1),
        cpu2(2)
    }

-- 1.3.6.1.4.1.8691
moxa OBJECT IDENTIFIER
    ::= { enterprises 8691 }

-- 1.3.6.1.4.1.8691.10
dataAcquisitionAndControl OBJECT IDENTIFIER
    ::= { moxa 10 }

-- 1.3.6.1.4.1.8691.10.6500.1
systemInfo OBJECT IDENTIFIER
    ::= { ioPAC6500 1 }

-- 1.3.6.1.4.1.8691.10.6500.1.1
deviceName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "device name"
    ::= { systemInfo 1 }

-- 1.3.6.1.4.1.8691.10.6500.1.2
description OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Description"
    ::= { systemInfo 2 }

-- 1.3.6.1.4.1.8691.10.6500.1.3
serialNumber OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "serial number"
    ::= { systemInfo 3 }

-- 1.3.6.1.4.1.8691.10.6500.1.4
systemUpTime OBJECT-TYPE
    SYNTAX TimeTicks
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "system up time"
    ::= { systemInfo 4 }

-- 1.3.6.1.4.1.8691.10.6500.1.5
cpuUsage OBJECT-TYPE
    SYNTAX Gauge32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "cpu usage"
    ::= { systemInfo 5 }

-- 1.3.6.1.4.1.8691.10.6500.1.6
memoryUsage OBJECT-TYPE
    SYNTAX Gauge32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "memory usage (%)"
    ::= { systemInfo 6 }

-- 1.3.6.1.4.1.8691.10.6500.1.7
cpuTemp OBJECT-TYPE
    SYNTAX Gauge32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "CPU temperature (C)"
    ::= { systemInfo 7 }

-- 1.3.6.1.4.1.8691.10.6500.1.8
modeSwitch OBJECT-TYPE
SYNTAX ModeSwitchTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Mode Switch"
    ::= { systemInfo 8 }

-- 1.3.6.1.4.1.8691.10.6500.1.9
redundantStatus OBJECT-TYPE
SYNTAX RedundantStatusTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Redundant Status"
    ::= { systemInfo 9 }

-- 1.3.6.1.4.1.8691.10.6500.1.10
applicationStatus OBJECT-TYPE
SYNTAX ApplicationStatusTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Application Status"
    ::= { systemInfo 10 }

-- 1.3.6.1.4.1.8691.10.6500.1.11
svEnableTrustedAccess OBJECT-TYPE
SYNTAX EnableDisableTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Security view - Enable Trusted Access"
    ::= { systemInfo 11 }

-- 1.3.6.1.4.1.8691.10.6500.1.12
svEnableDDoSProtection OBJECT-TYPE
SYNTAX EnableDisableTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Security view - Enable DDoS Protection"
    ::= { systemInfo 12 }

-- 1.3.6.1.4.1.8691.10.6500.1.13
svEnAcctLoginFailLockout OBJECT-TYPE
SYNTAX EnableDisableTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Security view - Enable Account Login Failure Lockout"
    ::= { systemInfo 13 }

-- 1.3.6.1.4.1.8691.10.6500.1.14
svSetLoginMessage OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Security view - Set Login Message"
    ::= { systemInfo 14 }

-- 1.3.6.1.4.1.8691.10.6500.1.15
svSetSNMPTrap OBJECT-TYPE
SYNTAX EnableDisableTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Security view - Set SNMP Trap"
    ::= { systemInfo 15 }

-- 1.3.6.1.4.1.8691.10.6500.1.16
svSetSyslogServer OBJECT-TYPE
SYNTAX EnableDisableTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Security view - Set Syslog Server"
    ::= { systemInfo 16 }

-- 1.3.6.1.4.1.8691.10.6500.2
cpu OBJECT IDENTIFIER
    ::= { ioPAC6500 2 }

-- 1.3.6.1.4.1.8691.10.6500.2.1
cpuTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CpuEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "CPU - table"
    ::= { cpu 1 }

-- 1.3.6.1.4.1.8691.10.6500.2.1.1
cpuEntry OBJECT-TYPE
    SYNTAX CpuEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "CPU - entry"
    INDEX { cpuIndex }
    ::= { cpuTable 1 }

CpuEntry ::= SEQUENCE {
    cpuIndex              Integer32,
    cpuUnitName           DisplayString,
    cpuSlotNum            Integer32,
    cpuModelName          DisplayString,
    cpuSerialNumber       DisplayString,
    cpuFirmwareVersion    DisplayString,
    cpuFirmwareBuildDate  DisplayString,
    cpuModuleState        CpuModuleStateTC,
    cpuLan1Ipv4           DisplayString,
    cpuLan1Ipv6           DisplayString,
    cpuMac1               MacAddress,
    cpuLan2Ipv4           DisplayString,
    cpuLan2Ipv6           DisplayString,
    cpuMac2               MacAddress
}

-- 1.3.6.1.4.1.8691.10.6500.2.1.1.1
cpuIndex OBJECT-TYPE
    SYNTAX Integer32 (0..511)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "CPU - index"
    ::= { cpuEntry 1 }

-- 1.3.6.1.4.1.8691.10.6500.2.1.1.2
cpuUnitName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "CPU - unit name (E0, E1, E2, E3, E4)"
    ::= { cpuEntry 2 }

-- 1.3.6.1.4.1.8691.10.6500.2.1.1.3
cpuSlotNum OBJECT-TYPE
    SYNTAX Integer32 (0..63)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "CPU - slot number (1, 2, 3, ...)"
    ::= { cpuEntry 3 }

-- 1.3.6.1.4.1.8691.10.6500.2.1.1.4
cpuModelName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "CPU - Model Name"
    ::= { cpuEntry 4 }

-- 1.3.6.1.4.1.8691.10.6500.2.1.1.5
cpuSerialNumber OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "CPU - Serial Number"
    ::= { cpuEntry 5 }

-- 1.3.6.1.4.1.8691.10.6500.2.1.1.6
cpuFirmwareVersion OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "CPU - firmware version"
    ::= { cpuEntry 6 }

-- 1.3.6.1.4.1.8691.10.6500.2.1.1.7
cpuFirmwareBuildDate OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "CPU - Firmware Build Date"
    ::= { cpuEntry 7 }

-- 1.3.6.1.4.1.8691.10.6500.2.1.1.8
cpuModuleState OBJECT-TYPE
SYNTAX CpuModuleStateTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "CPU - Module State"
    ::= { cpuEntry 8 }

-- 1.3.6.1.4.1.8691.10.6500.2.1.1.9
cpuLan1Ipv4 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "CPU - LAN 1 IPv4 Address"
    ::= { cpuEntry 9 }

-- 1.3.6.1.4.1.8691.10.6500.2.1.1.10
cpuLan1Ipv6 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "CPU - LAN 1 IPv6 Address"
    ::= { cpuEntry 10 }

-- 1.3.6.1.4.1.8691.10.6500.2.1.1.11
cpuMac1 OBJECT-TYPE
    SYNTAX MacAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "CPU - MAC 1 Address"
    ::= { cpuEntry 11 }

-- 1.3.6.1.4.1.8691.10.6500.2.1.1.12
cpuLan2Ipv4 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "CPU - LAN 2 IPv4 Address"
    ::= { cpuEntry 12 }

-- 1.3.6.1.4.1.8691.10.6500.2.1.1.13
cpuLan2Ipv6 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "CPU - LAN 2 IPv6 Address"
    ::= { cpuEntry 13 }

-- 1.3.6.1.4.1.8691.10.6500.2.1.1.14
cpuMac2 OBJECT-TYPE
    SYNTAX MacAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "CPU - MAC 2 Address"
    ::= { cpuEntry 14 }

-- 1.3.6.1.4.1.8691.10.6500.3
pwr OBJECT IDENTIFIER
    ::= { ioPAC6500 3 }

-- 1.3.6.1.4.1.8691.10.6500.3.1
pwrTable OBJECT-TYPE
    SYNTAX SEQUENCE OF PwrEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Power - table"
    ::= { pwr 1 }

-- 1.3.6.1.4.1.8691.10.6500.3.1.1
pwrEntry OBJECT-TYPE
    SYNTAX PwrEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Power - entry"
    INDEX { pwrIndex }
    ::= { pwrTable 1 }

PwrEntry ::= SEQUENCE {
    pwrIndex              Integer32,
    pwrUnitName           DisplayString,
    pwrSlotNum            Integer32,
    pwrModelName          DisplayString,
    pwrSerialNumber       DisplayString,
    pwrFirmwareVersion    DisplayString,
    pwrFirmwareBuildDate  DisplayString,
    pwrModuleState        Integer32,
    pwrSystemPower        Gauge32,
    pwrSystemPowerFail    Integer32,
    pwrFieldPowerFail     Integer32
}

-- 1.3.6.1.4.1.8691.10.6500.3.1.1.1
pwrIndex OBJECT-TYPE
    SYNTAX Integer32 (0..511)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Power - index"
    ::= { pwrEntry 1 }

-- 1.3.6.1.4.1.8691.10.6500.3.1.1.2
pwrUnitName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Power - unit name (E0, E1, E2, E3, E4)"
    ::= { pwrEntry 2 }

-- 1.3.6.1.4.1.8691.10.6500.3.1.1.3
pwrSlotNum OBJECT-TYPE
    SYNTAX Integer32 (0..63)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Power - slot number (1, 2, 3, ...)"
    ::= { pwrEntry 3 }

-- 1.3.6.1.4.1.8691.10.6500.3.1.1.4
pwrModelName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Power - Model Name"
    ::= { pwrEntry 4 }

-- 1.3.6.1.4.1.8691.10.6500.3.1.1.5
pwrSerialNumber OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Power - Serial Number"
    ::= { pwrEntry 5 }

-- 1.3.6.1.4.1.8691.10.6500.3.1.1.6
pwrFirmwareVersion OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Power - firmware version"
    ::= { pwrEntry 6 }

-- 1.3.6.1.4.1.8691.10.6500.3.1.1.7
pwrFirmwareBuildDate OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Power - Firmware Build Date"
    ::= { pwrEntry 7 }

-- 1.3.6.1.4.1.8691.10.6500.3.1.1.8
pwrModuleState OBJECT-TYPE
SYNTAX ModuleStateTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Power - Module State"
    ::= { pwrEntry 8 }

-- 1.3.6.1.4.1.8691.10.6500.3.1.1.9
pwrSystemPower OBJECT-TYPE
    SYNTAX Gauge32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Power - System Power"
    ::= { pwrEntry 9 }

-- 1.3.6.1.4.1.8691.10.6500.3.1.1.10
pwrSystemPowerFail OBJECT-TYPE
SYNTAX PwrSystemPowerFailTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Power - System Power Fail"
    ::= { pwrEntry 10 }

-- 1.3.6.1.4.1.8691.10.6500.3.1.1.11
pwrFieldPowerFail OBJECT-TYPE
SYNTAX PwrFieldPowerFailTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Power - Field Power Fail"
    ::= { pwrEntry 11 }

-- 1.3.6.1.4.1.8691.10.6500.4
exp OBJECT IDENTIFIER
    ::= { ioPAC6500 4 }

-- 1.3.6.1.4.1.8691.10.6500.4.1
expTable OBJECT-TYPE
    SYNTAX SEQUENCE OF ExpEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "EXP - table"
    ::= { exp 1 }

-- 1.3.6.1.4.1.8691.10.6500.4.1.1
expEntry OBJECT-TYPE
    SYNTAX ExpEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "EXP - entry"
    INDEX { expIndex }
    ::= { expTable 1 }

ExpEntry ::= SEQUENCE {
    expIndex              Integer32,
    expUnitName           DisplayString,
    expSlotNum            Integer32,
    expModelName          DisplayString,
    expSerialNumber       DisplayString,
    expFirmwareVersion    DisplayString,
    expFirmwareBuildDate  DisplayString,
    expModuleState        Integer32,
    expPrevInterface      Integer32,
    expPrevLinkStatus     Integer32,
    expNextInterface      Integer32,
    expNextLinkStatus     Integer32
}

-- 1.3.6.1.4.1.8691.10.6500.4.1.1.1
expIndex OBJECT-TYPE
    SYNTAX Integer32 (0..511)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "EXP - index"
    ::= { expEntry 1 }

-- 1.3.6.1.4.1.8691.10.6500.4.1.1.2
expUnitName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "EXP - unit name (E0, E1, E2, E3, E4)"
    ::= { expEntry 2 }

-- 1.3.6.1.4.1.8691.10.6500.4.1.1.3
expSlotNum OBJECT-TYPE
    SYNTAX Integer32 (0..63)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "EXP - slot number (1, 2, 3, ...)"
    ::= { expEntry 3 }

-- 1.3.6.1.4.1.8691.10.6500.4.1.1.4
expModelName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "EXP - Model Name"
    ::= { expEntry 4 }

-- 1.3.6.1.4.1.8691.10.6500.4.1.1.5
expSerialNumber OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "EXP - Serial Number"
    ::= { expEntry 5 }

-- 1.3.6.1.4.1.8691.10.6500.4.1.1.6
expFirmwareVersion OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "EXP - firmware version"
    ::= { expEntry 6 }

-- 1.3.6.1.4.1.8691.10.6500.4.1.1.7
expFirmwareBuildDate OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "EXP - Firmware Build Date"
    ::= { expEntry 7 }

-- 1.3.6.1.4.1.8691.10.6500.4.1.1.8
expModuleState OBJECT-TYPE
SYNTAX ModuleStateTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "EXP - Module State"
    ::= { expEntry 8 }

-- 1.3.6.1.4.1.8691.10.6500.4.1.1.9
expPrevInterface OBJECT-TYPE
SYNTAX ExpPrevInterfaceTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "EXP - Previous Interface"
    ::= { expEntry 9 }

-- 1.3.6.1.4.1.8691.10.6500.4.1.1.10
expPrevLinkStatus OBJECT-TYPE
SYNTAX ExpPrevLinkStatusTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "EXP - Previous Link Status"
    ::= { expEntry 10 }

-- 1.3.6.1.4.1.8691.10.6500.4.1.1.11
expNextInterface OBJECT-TYPE
SYNTAX ExpPrevInterfaceTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "EXP - Next Interface"
    ::= { expEntry 11 }

-- 1.3.6.1.4.1.8691.10.6500.4.1.1.12
expNextLinkStatus OBJECT-TYPE
SYNTAX ExpPrevLinkStatusTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "EXP - Next Link Status"
    ::= { expEntry 12 }

-- 1.3.6.1.4.1.8691.10.6500.11
di OBJECT IDENTIFIER
    ::= { ioPAC6500 11 }

-- 1.3.6.1.4.1.8691.10.6500.11.1
diTable OBJECT-TYPE
    SYNTAX SEQUENCE OF DiEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "DI - table"
    ::= { di 1 }

-- 1.3.6.1.4.1.8691.10.6500.11.1.1
diEntry OBJECT-TYPE
    SYNTAX DiEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "DI - entry"
    INDEX { diIndex }
    ::= { diTable 1 }

DiEntry ::= SEQUENCE {
    diIndex             Integer32,
    diUnitName          DisplayString,
    diSlotNum           Integer32,
    diChannelNum        Integer32,
    diMode              Integer32,
    diValue             Integer32,
    diDiagnosticError   Integer32,
    diWireBreak         Integer32,
    diCounterStatus     Integer32,
    diCounterValue      Gauge32
}

-- 1.3.6.1.4.1.8691.10.6500.11.1.1.1
diIndex OBJECT-TYPE
    SYNTAX Integer32 (0..511)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "DI - index"
    ::= { diEntry 1 }

-- 1.3.6.1.4.1.8691.10.6500.11.1.1.2
diUnitName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "DI - unit name (E0, E1, E2, E3, E4)"
    ::= { diEntry 2 }

-- 1.3.6.1.4.1.8691.10.6500.11.1.1.3
diSlotNum OBJECT-TYPE
    SYNTAX Integer32 (0..63)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "DI - slot number (1, 2, 3, ...)"
    ::= { diEntry 3 }

-- 1.3.6.1.4.1.8691.10.6500.11.1.1.4
diChannelNum OBJECT-TYPE
    SYNTAX Integer32 (0..31)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "DI - channel number"
    ::= { diEntry 4 }

-- 1.3.6.1.4.1.8691.10.6500.11.1.1.5
diMode OBJECT-TYPE
SYNTAX DiModeTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "DI - mode "
    ::= { diEntry 5 }

-- 1.3.6.1.4.1.8691.10.6500.11.1.1.6
diValue OBJECT-TYPE
SYNTAX OnOffTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "DI - Value"
    ::= { diEntry 6 }

-- 1.3.6.1.4.1.8691.10.6500.11.1.1.7
diDiagnosticError OBJECT-TYPE
SYNTAX DiagnosticErrorTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "DI - Diagnostic Error"
    ::= { diEntry 7 }

-- 1.3.6.1.4.1.8691.10.6500.11.1.1.8
diWireBreak OBJECT-TYPE
SYNTAX WireBreakTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "DI - Wire Break"
    ::= { diEntry 8 }

-- 1.3.6.1.4.1.8691.10.6500.11.1.1.9
diCounterStatus OBJECT-TYPE
SYNTAX DiCounterStatusTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "DI - Counter mode - status"
    ::= { diEntry 9 }

-- 1.3.6.1.4.1.8691.10.6500.11.1.1.10
diCounterValue OBJECT-TYPE
    SYNTAX Gauge32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "DI - Counter mode - value"
    ::= { diEntry 10 }

-- 1.3.6.1.4.1.8691.10.6500.11.2
diModuleTable OBJECT-TYPE
    SYNTAX SEQUENCE OF DiModuleEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "DI - Module table"
    ::= { di 2 }

-- 1.3.6.1.4.1.8691.10.6500.11.2.1
diModuleEntry OBJECT-TYPE
    SYNTAX DiModuleEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "DI - Module entry"
    INDEX { diModuleIndex }
    ::= { diModuleTable 1 }

DiModuleEntry ::= SEQUENCE {
    diModuleIndex               Integer32,
    diModuleUnitName            DisplayString,
    diModuleSlotNum             Integer32,
    diModelName                 DisplayString,
    diSerialNumber              DisplayString,
    diFirmwareVersion           DisplayString,
    diFirmwareBuildDate         DisplayString,
    diModuleState               Integer32,
    diFieldCircuitSupplyLoss    Integer32
}

-- 1.3.6.1.4.1.8691.10.6500.11.2.1.1
diModuleIndex OBJECT-TYPE
    SYNTAX Integer32 (0..511)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "DI - Module index"
    ::= { diModuleEntry 1 }

-- 1.3.6.1.4.1.8691.10.6500.11.2.1.2
diModuleUnitName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "DI - unit name (E0, E1, E2, E3, E4)"
    ::= { diModuleEntry 2 }

-- 1.3.6.1.4.1.8691.10.6500.11.2.1.3
diModuleSlotNum OBJECT-TYPE
    SYNTAX Integer32 (0..63)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "DI - slot number (1, 2, 3, ...)"
    ::= { diModuleEntry 3 }

-- 1.3.6.1.4.1.8691.10.6500.11.2.1.4
diModelName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "DI - Model Name"
    ::= { diModuleEntry 4 }

-- 1.3.6.1.4.1.8691.10.6500.11.2.1.5
diSerialNumber OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "DI - Serial Number"
    ::= { diModuleEntry 5 }

-- 1.3.6.1.4.1.8691.10.6500.11.2.1.6
diFirmwareVersion OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "DI - firmware version"
    ::= { diModuleEntry 6 }

-- 1.3.6.1.4.1.8691.10.6500.11.2.1.7
diFirmwareBuildDate OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "DI - Firmware Build Date"
    ::= { diModuleEntry 7 }

-- 1.3.6.1.4.1.8691.10.6500.11.2.1.8
diModuleState OBJECT-TYPE
SYNTAX ModuleStateTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "DI - Module State"
    ::= { diModuleEntry 8 }

-- 1.3.6.1.4.1.8691.10.6500.11.2.1.9
diFieldCircuitSupplyLoss OBJECT-TYPE
SYNTAX DiFieldCircuitSupplyLossTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "DI - Field Circuit Supply Loss"
    ::= { diModuleEntry 9 }

-- 1.3.6.1.4.1.8691.10.6500.12
do OBJECT IDENTIFIER
    ::= { ioPAC6500 12 }

-- 1.3.6.1.4.1.8691.10.6500.12.1
doTable OBJECT-TYPE
    SYNTAX SEQUENCE OF DoEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "DO - table"
    ::= { do 1 }

-- 1.3.6.1.4.1.8691.10.6500.12.1.1
doEntry OBJECT-TYPE
    SYNTAX DoEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "DO - entry"
    INDEX { doIndex }
    ::= { doTable 1 }

DoEntry ::= SEQUENCE {
    doIndex             Integer32,
    doUnitName          DisplayString,
    doSlotNum           Integer32,
    doChannelNum        Integer32,
    doMode              Integer32,
    doValue             Integer32,
    doDiagnosticError   Integer32,
    doWireBreak         Integer32,
    doShortCircuit      Integer32,
    doPulseStatus       Integer32
}

-- 1.3.6.1.4.1.8691.10.6500.12.1.1.1
doIndex OBJECT-TYPE
    SYNTAX Integer32 (0..511)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "DO - index"
    ::= { doEntry 1 }

-- 1.3.6.1.4.1.8691.10.6500.12.1.1.2
doUnitName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "DO - unit name (E0, E1, E2, E3, E4)"
    ::= { doEntry 2 }

-- 1.3.6.1.4.1.8691.10.6500.12.1.1.3
doSlotNum OBJECT-TYPE
    SYNTAX Integer32 (0..63)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "DO - slot number (1, 2, 3, ...)"
    ::= { doEntry 3 }

-- 1.3.6.1.4.1.8691.10.6500.12.1.1.4
doChannelNum OBJECT-TYPE
    SYNTAX Integer32 (0..31)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "DO - channel number"
    ::= { doEntry 4 }

-- 1.3.6.1.4.1.8691.10.6500.12.1.1.5
doMode OBJECT-TYPE
SYNTAX DoModeTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "DO - mode"
    ::= { doEntry 5 }

-- 1.3.6.1.4.1.8691.10.6500.12.1.1.6
doValue OBJECT-TYPE
SYNTAX OnOffTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "DO - DO mode - Value"
    ::= { doEntry 6 }

-- 1.3.6.1.4.1.8691.10.6500.12.1.1.7
doDiagnosticError OBJECT-TYPE
SYNTAX DiagnosticErrorTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "DO - Diagnostic Error"
    ::= { doEntry 7 }

-- 1.3.6.1.4.1.8691.10.6500.12.1.1.8
doWireBreak OBJECT-TYPE
SYNTAX WireBreakTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "DO - Wire Break"
    ::= { doEntry 8 }

-- 1.3.6.1.4.1.8691.10.6500.12.1.1.9
doShortCircuit OBJECT-TYPE
SYNTAX ShortCircuitTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "DO - Short Circuit"
    ::= { doEntry 9 }

-- 1.3.6.1.4.1.8691.10.6500.12.1.1.10
doPulseStatus OBJECT-TYPE
SYNTAX DoPulseStatusTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "DO - Pulse mode - status "
    ::= { doEntry 10 }

-- 1.3.6.1.4.1.8691.10.6500.12.2
doModuleTable OBJECT-TYPE
    SYNTAX SEQUENCE OF DoModuleEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "DO - Module table"
    ::= { do 2 }

-- 1.3.6.1.4.1.8691.10.6500.12.2.1
doModuleEntry OBJECT-TYPE
    SYNTAX DoModuleEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "DO - Module entry"
    INDEX { doModuleIndex }
    ::= { doModuleTable 1 }

DoModuleEntry ::= SEQUENCE {
    doModuleIndex         Integer32,
    doModuleUnitName      DisplayString,
    doModuleSlotNum       Integer32,
    doModelName           DisplayString,
    doSerialNumber        DisplayString,
    doFirmwareVersion     DisplayString,
    doFirmwareBuildDate   DisplayString,
    doModuleState         Integer32,
    doCommonPowerLoss     Integer32
}

-- 1.3.6.1.4.1.8691.10.6500.12.2.1.1
doModuleIndex OBJECT-TYPE
    SYNTAX Integer32 (0..511)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "DO - Module index"
    ::= { doModuleEntry 1 }

-- 1.3.6.1.4.1.8691.10.6500.12.2.1.2
doModuleUnitName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "DO - unit name (E0, E1, E2, E3, E4)"
    ::= { doModuleEntry 2 }

-- 1.3.6.1.4.1.8691.10.6500.12.2.1.3
doModuleSlotNum OBJECT-TYPE
    SYNTAX Integer32 (0..63)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "DO - slot number (1, 2, 3, ...)"
    ::= { doModuleEntry 3 }

-- 1.3.6.1.4.1.8691.10.6500.12.2.1.4
doModelName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "DO - Model Name"
    ::= { doModuleEntry 4 }

-- 1.3.6.1.4.1.8691.10.6500.12.2.1.5
doSerialNumber OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "DO - Serial Number"
    ::= { doModuleEntry 5 }

-- 1.3.6.1.4.1.8691.10.6500.12.2.1.6
doFirmwareVersion OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "DO - firmware version"
    ::= { doModuleEntry 6 }

-- 1.3.6.1.4.1.8691.10.6500.12.2.1.7
doFirmwareBuildDate OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "DO - Firmware Build Date"
    ::= { doModuleEntry 7 }

-- 1.3.6.1.4.1.8691.10.6500.12.2.1.8
doModuleState OBJECT-TYPE
SYNTAX ModuleStateTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "DO - Module State"
    ::= { doModuleEntry 8 }

-- 1.3.6.1.4.1.8691.10.6500.12.2.1.9
doCommonPowerLoss OBJECT-TYPE
SYNTAX DoCommonPowerLossTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "DO - do common power loss"
    ::= { doModuleEntry 9 }

-- 1.3.6.1.4.1.8691.10.6500.13
relay OBJECT IDENTIFIER
    ::= { ioPAC6500 13 }

-- 1.3.6.1.4.1.8691.10.6500.13.1
relayTable OBJECT-TYPE
    SYNTAX SEQUENCE OF RelayEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Relay - table"
    ::= { relay 1 }

-- 1.3.6.1.4.1.8691.10.6500.13.1.1
relayEntry OBJECT-TYPE
    SYNTAX RelayEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Relay - entry"
    INDEX { relayIndex }
    ::= { relayTable 1 }

RelayEntry ::= SEQUENCE {
    relayIndex             Integer32,
    relayUnitName          DisplayString,
    relaySlotNum           Integer32,
    relayChannelNum        Integer32,
    relayValue             Integer32,
    relayPulseCount        Integer32,
    relayPulseMode         Integer32,
    relayFailSafeAction    Integer32,
    relayPulseStartStop    Integer32,
    relayPulseLowWidth     Integer32,
    relayPulseHighWidth    Integer32
}

-- 1.3.6.1.4.1.8691.10.6500.13.1.1.1
relayIndex OBJECT-TYPE
    SYNTAX Integer32 (0..127)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Relay - index"
    ::= { relayEntry 1 }

-- 1.3.6.1.4.1.8691.10.6500.13.1.1.2
relayUnitName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Relay - unit name (E0, E1, E2, E3, E4)"
    ::= { relayEntry 2 }

-- 1.3.6.1.4.1.8691.10.6500.13.1.1.3
relaySlotNum OBJECT-TYPE
    SYNTAX Integer32 (0..63)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Relay - slot number (1, 2, 3, ...)"
    ::= { relayEntry 3 }

-- 1.3.6.1.4.1.8691.10.6500.13.1.1.4
relayChannelNum OBJECT-TYPE
    SYNTAX Integer32 (0..15)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Relay - channel number"
    ::= { relayEntry 4 }

-- 1.3.6.1.4.1.8691.10.6500.13.1.1.5
relayValue OBJECT-TYPE
SYNTAX OnOffTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Relay - Value"
    ::= { relayEntry 5 }

-- 1.3.6.1.4.1.8691.10.6500.13.1.1.6
relayPulseCount OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Relay - Pulse count"
    ::= { relayEntry 6 }

-- 1.3.6.1.4.1.8691.10.6500.13.1.1.7
relayPulseMode OBJECT-TYPE
SYNTAX RelayPulseModeTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Relay - Pulse mode"
    ::= { relayEntry 7 }

-- 1.3.6.1.4.1.8691.10.6500.13.1.1.8
relayFailSafeAction OBJECT-TYPE
SYNTAX RelayFailSafeActionTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Relay - Fail Safe Action"
    ::= { relayEntry 8 }

-- 1.3.6.1.4.1.8691.10.6500.13.1.1.9
relayPulseStartStop OBJECT-TYPE
SYNTAX DoPulseStatusTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Relay - Pulse Start Stop"
    ::= { relayEntry 9 }

-- 1.3.6.1.4.1.8691.10.6500.13.1.1.10
relayPulseLowWidth OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Relay - Pulse mode - low width (unit: 500 ms)"
    ::= { relayEntry 10 }

-- 1.3.6.1.4.1.8691.10.6500.13.1.1.11
relayPulseHighWidth OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Relay - Pulse mode - high width (unit: 500 ms)"
    ::= { relayEntry 11 }

-- 1.3.6.1.4.1.8691.10.6500.13.2
relayModuleTable OBJECT-TYPE
    SYNTAX SEQUENCE OF RelayModuleEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Relay - Module table"
    ::= { relay 2 }

-- 1.3.6.1.4.1.8691.10.6500.13.2.1
relayModuleEntry OBJECT-TYPE
    SYNTAX RelayModuleEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Relay - Module entry"
    INDEX { relayModuleIndex }
    ::= { relayModuleTable 1 }

RelayModuleEntry ::= SEQUENCE {
    relayModuleIndex         Integer32,
    relayModuleUnitName      DisplayString,
    relayModuleSlotNum       Integer32,
    relayModelName           DisplayString,
    relaySerialNumber        DisplayString,
    relayFirmwareVersion     DisplayString,
    relayFirmwareBuildDate   DisplayString,
    relayModuleState         Integer32
}

-- 1.3.6.1.4.1.8691.10.6500.13.2.1.1
relayModuleIndex OBJECT-TYPE
    SYNTAX Integer32 (0..511)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Relay - Module index"
    ::= { relayModuleEntry 1 }

-- 1.3.6.1.4.1.8691.10.6500.13.2.1.2
relayModuleUnitName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Relay - unit name (E0, E1, E2, E3, E4)"
    ::= { relayModuleEntry 2 }

-- 1.3.6.1.4.1.8691.10.6500.13.2.1.3
relayModuleSlotNum OBJECT-TYPE
    SYNTAX Integer32 (0..63)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Relay - slot number (1, 2, 3, ...)"
    ::= { relayModuleEntry 3 }

-- 1.3.6.1.4.1.8691.10.6500.13.2.1.4
relayModelName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Relay - Model Name"
    ::= { relayModuleEntry 4 }

-- 1.3.6.1.4.1.8691.10.6500.13.2.1.5
relaySerialNumber OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Relay - Serial Number"
    ::= { relayModuleEntry 5 }

-- 1.3.6.1.4.1.8691.10.6500.13.2.1.6
relayFirmwareVersion OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Relay - firmware version"
    ::= { relayModuleEntry 6 }

-- 1.3.6.1.4.1.8691.10.6500.13.2.1.7
relayFirmwareBuildDate OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Relay - Firmware Build Date"
    ::= { relayModuleEntry 7 }

-- 1.3.6.1.4.1.8691.10.6500.13.2.1.8
relayModuleState OBJECT-TYPE
SYNTAX ModuleStateTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Relay - Module State"
    ::= { relayModuleEntry 8 }

-- 1.3.6.1.4.1.8691.10.6500.21
ai OBJECT IDENTIFIER
    ::= { ioPAC6500 21 }

-- 1.3.6.1.4.1.8691.10.6500.21.1
aiTable OBJECT-TYPE
    SYNTAX SEQUENCE OF AiEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "AI - table"
    ::= { ai 1 }

-- 1.3.6.1.4.1.8691.10.6500.21.1.1
aiEntry OBJECT-TYPE
    SYNTAX AiEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "AI - entry"
    INDEX { aiIndex }
    ::= { aiTable 1 }

AiEntry ::= SEQUENCE {
    aiIndex             Integer32,
    aiUnitName          DisplayString,
    aiSlotNum           Integer32,
    aiChannelNum        Integer32,
    aiMode              Integer32,
    aiValue             Integer32,
    aiDiagnosticError   Integer32,
    aiWireBreak         Integer32,
    aiUnderflow         Integer32,
    aiUnderRange        Integer32,
    aiOverRange         Integer32,
    aiOverFlow          Integer32,
    aiShortCircuit      Integer32
}

-- 1.3.6.1.4.1.8691.10.6500.21.1.1.1
aiIndex OBJECT-TYPE
    SYNTAX Integer32 (0..255)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "AI - index"
    ::= { aiEntry 1 }

-- 1.3.6.1.4.1.8691.10.6500.21.1.1.2
aiUnitName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "AI - unit name (E0, E1, E2, E3, E4)"
    ::= { aiEntry 2 }

-- 1.3.6.1.4.1.8691.10.6500.21.1.1.3
aiSlotNum OBJECT-TYPE
    SYNTAX Integer32 (0..63)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "AI - slot number (1, 2, 3, ...)"
    ::= { aiEntry 3 }

-- 1.3.6.1.4.1.8691.10.6500.21.1.1.4
aiChannelNum OBJECT-TYPE
    SYNTAX Integer32 (0..31)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "AI - channel number"
    ::= { aiEntry 4 }

-- 1.3.6.1.4.1.8691.10.6500.21.1.1.5
aiMode OBJECT-TYPE
    SYNTAX Integer32 (0..4)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "AI - mode {disable(0), 0-10 VDC(1), 1-5 VDC(2), 4-20mA(3), 0-20mA(4)}"
    ::= { aiEntry 5 }

-- 1.3.6.1.4.1.8691.10.6500.21.1.1.6
aiValue OBJECT-TYPE
    SYNTAX Integer32 (-32768..32767)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "AI - Value"
    ::= { aiEntry 6 }

-- 1.3.6.1.4.1.8691.10.6500.21.1.1.7
aiDiagnosticError OBJECT-TYPE
SYNTAX DiagnosticErrorTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "AI - Diagnostic error"
    ::= { aiEntry 7 }

-- 1.3.6.1.4.1.8691.10.6500.21.1.1.8
aiWireBreak OBJECT-TYPE
SYNTAX WireBreakTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "AI - Wire break"
    ::= { aiEntry 8 }

-- 1.3.6.1.4.1.8691.10.6500.21.1.1.9
aiUnderflow OBJECT-TYPE
SYNTAX AiUnderflowTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "AI - Under flow"
    ::= { aiEntry 9 }

-- 1.3.6.1.4.1.8691.10.6500.21.1.1.10
aiUnderRange OBJECT-TYPE
SYNTAX UnderRangeTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "AI - Under range"
    ::= { aiEntry 10 }

-- 1.3.6.1.4.1.8691.10.6500.21.1.1.11
aiOverRange OBJECT-TYPE
SYNTAX OverRangeTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "AI - Over range"
    ::= { aiEntry 11 }

-- 1.3.6.1.4.1.8691.10.6500.21.1.1.12
aiOverFlow OBJECT-TYPE
SYNTAX OverFlowTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "AI - Over flow"
    ::= { aiEntry 12 }

-- 1.3.6.1.4.1.8691.10.6500.21.1.1.13
aiShortCircuit OBJECT-TYPE
SYNTAX ShortCircuitTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "AI - Short Circuit"
    ::= { aiEntry 13 }

-- 1.3.6.1.4.1.8691.10.6500.21.2
aiModuleTable OBJECT-TYPE
    SYNTAX SEQUENCE OF AiModuleEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "AI - Module table"
    ::= { ai 2 }

-- 1.3.6.1.4.1.8691.10.6500.21.2.1
aiModuleEntry OBJECT-TYPE
    SYNTAX AiModuleEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "AI - Module entry"
    INDEX { aiModuleIndex }
    ::= { aiModuleTable 1 }

AiModuleEntry ::= SEQUENCE {
    aiModuleIndex         Integer32,
    aiModuleUnitName      DisplayString,
    aiModuleSlotNum       Integer32,
    aiModelName           DisplayString,
    aiSerialNumber        DisplayString,
    aiFirmwareVersion     DisplayString,
    aiFirmwareBuildDate   DisplayString,
    aiModuleState         Integer32,
    aiLoopPower1Loss      Integer32,
    aiLoopPower2Loss      Integer32
}

-- 1.3.6.1.4.1.8691.10.6500.21.2.1.1
aiModuleIndex OBJECT-TYPE
    SYNTAX Integer32 (0..511)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "AI - Module index"
    ::= { aiModuleEntry 1 }

-- 1.3.6.1.4.1.8691.10.6500.21.2.1.2
aiModuleUnitName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "AI - unit name (E0, E1, E2, E3, E4)"
    ::= { aiModuleEntry 2 }

-- 1.3.6.1.4.1.8691.10.6500.21.2.1.3
aiModuleSlotNum OBJECT-TYPE
    SYNTAX Integer32 (0..63)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "AI - slot number (1, 2, 3, ...)"
    ::= { aiModuleEntry 3 }

-- 1.3.6.1.4.1.8691.10.6500.21.2.1.4
aiModelName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "AI - Model Name"
    ::= { aiModuleEntry 4 }

-- 1.3.6.1.4.1.8691.10.6500.21.2.1.5
aiSerialNumber OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "AI - Serial Number"
    ::= { aiModuleEntry 5 }

-- 1.3.6.1.4.1.8691.10.6500.21.2.1.6
aiFirmwareVersion OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "AI - firmware version"
    ::= { aiModuleEntry 6 }

-- 1.3.6.1.4.1.8691.10.6500.21.2.1.7
aiFirmwareBuildDate OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "AI - Firmware Build Date"
    ::= { aiModuleEntry 7 }

-- 1.3.6.1.4.1.8691.10.6500.21.2.1.8
aiModuleState OBJECT-TYPE
SYNTAX ModuleStateTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "AI - Module State"
    ::= { aiModuleEntry 8 }

-- 1.3.6.1.4.1.8691.10.6500.21.2.1.9
aiLoopPower1Loss OBJECT-TYPE
SYNTAX AiLoopPower1LossTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "AI - Loop Power 1 loss"
    ::= { aiModuleEntry 9 }

-- 1.3.6.1.4.1.8691.10.6500.21.2.1.10
aiLoopPower2Loss OBJECT-TYPE
SYNTAX AiLoopPower2LossTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "AI - Loop Power 2 loss"
    ::= { aiModuleEntry 10 }

-- 1.3.6.1.4.1.8691.10.6500.22
hartAi OBJECT IDENTIFIER
    ::= { ioPAC6500 22 }

-- 1.3.6.1.4.1.8691.10.6500.22.1
hartAiTable OBJECT-TYPE
    SYNTAX SEQUENCE OF HartAiEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "HART AI - table"
    ::= { hartAi 1 }

-- 1.3.6.1.4.1.8691.10.6500.22.1.1
hartAiEntry OBJECT-TYPE
    SYNTAX HartAiEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "HART AI - entry"
    INDEX { hartAiIndex }
    ::= { hartAiTable 1 }

HartAiEntry ::= SEQUENCE {
    hartAiIndex             Integer32,
    hartAiUnitName          DisplayString,
    hartAiSlotNum           Integer32,
    hartAiChannelNum        Integer32,
    hartAiMode              Integer32,
    hartAiValue             Integer32,
    hartAiPv                Integer32,
    hartAiSv                Integer32,
    hartAiTv                Integer32,
    hartAiQv                Integer32,
    hartAiDiagnosticError   Integer32,
    hartAiWireBreak         Integer32,
    hartAiUnderflow         Integer32,
    hartAiUnderRange        Integer32,
    hartAiOverRange         Integer32,
    hartAiOverFlow          Integer32,
    hartAiShortCircuit      Integer32
}

-- 1.3.6.1.4.1.8691.10.6500.22.1.1.1
hartAiIndex OBJECT-TYPE
    SYNTAX Integer32 (0..255)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "HART AI - index"
    ::= { hartAiEntry 1 }

-- 1.3.6.1.4.1.8691.10.6500.22.1.1.2
hartAiUnitName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "HART AI - unit name (E0, E1, E2, E3, E4)"
    ::= { hartAiEntry 2 }

-- 1.3.6.1.4.1.8691.10.6500.22.1.1.3
hartAiSlotNum OBJECT-TYPE
    SYNTAX Integer32 (0..63)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "HART AI - slot number (1, 2, 3, ...)"
    ::= { hartAiEntry 3 }

-- 1.3.6.1.4.1.8691.10.6500.22.1.1.4
hartAiChannelNum OBJECT-TYPE
    SYNTAX Integer32 (0..31)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "HART AI - channel number"
    ::= { hartAiEntry 4 }

-- 1.3.6.1.4.1.8691.10.6500.22.1.1.5
hartAiMode OBJECT-TYPE
    SYNTAX Integer32 (0..4)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "HART AI - mode {disable(0), 4-20mA(3)}"
    ::= { hartAiEntry 5 }

-- 1.3.6.1.4.1.8691.10.6500.22.1.1.6
hartAiValue OBJECT-TYPE
    SYNTAX Integer32 (0..10000)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "HART AI - Value"
    ::= { hartAiEntry 6 }

-- 1.3.6.1.4.1.8691.10.6500.22.1.1.7
hartAiPv OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "HART AI - PV"
    ::= { hartAiEntry 7 }

-- 1.3.6.1.4.1.8691.10.6500.22.1.1.8
hartAiSv OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "HART AI - SV"
    ::= { hartAiEntry 8 }

-- 1.3.6.1.4.1.8691.10.6500.22.1.1.9
hartAiTv OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "HART AI - TV"
    ::= { hartAiEntry 9 }

-- 1.3.6.1.4.1.8691.10.6500.22.1.1.10
hartAiQv OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "HART AI - QV"
    ::= { hartAiEntry 10 }

-- 1.3.6.1.4.1.8691.10.6500.22.1.1.11
hartAiDiagnosticError OBJECT-TYPE
SYNTAX DiagnosticErrorTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "HART AI - Diagnostic error"
    ::= { hartAiEntry 11 }

-- 1.3.6.1.4.1.8691.10.6500.22.1.1.12
hartAiWireBreak OBJECT-TYPE
SYNTAX WireBreakTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "HART AI - Wire break"
    ::= { hartAiEntry 12 }

-- 1.3.6.1.4.1.8691.10.6500.22.1.1.13
hartAiUnderflow OBJECT-TYPE
SYNTAX AiUnderflowTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "HART AI - Under flow"
    ::= { hartAiEntry 13 }

-- 1.3.6.1.4.1.8691.10.6500.22.1.1.14
hartAiUnderRange OBJECT-TYPE
SYNTAX UnderRangeTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "HART AI - Under range"
    ::= { hartAiEntry 14 }

-- 1.3.6.1.4.1.8691.10.6500.22.1.1.15
hartAiOverRange OBJECT-TYPE
SYNTAX OverRangeTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "HART AI - Over range"
    ::= { hartAiEntry 15 }

-- 1.3.6.1.4.1.8691.10.6500.22.1.1.16
hartAiOverFlow OBJECT-TYPE
SYNTAX OverFlowTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "HART AI - Over flow"
    ::= { hartAiEntry 16 }

-- 1.3.6.1.4.1.8691.10.6500.22.1.1.17
hartAiShortCircuit OBJECT-TYPE
SYNTAX ShortCircuitTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "HART AI - Short Circuit"
    ::= { hartAiEntry 17 }

-- 1.3.6.1.4.1.8691.10.6500.22.2
hartAiModuleTable OBJECT-TYPE
    SYNTAX SEQUENCE OF HartAiModuleEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "HART AI - Module table"
    ::= { hartAi 2 }

-- 1.3.6.1.4.1.8691.10.6500.22.2.1
hartAiModuleEntry OBJECT-TYPE
    SYNTAX HartAiModuleEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "HART AI - Module entry"
    INDEX { hartAiModuleIndex }
    ::= { hartAiModuleTable 1 }

HartAiModuleEntry ::= SEQUENCE {
    hartAiModuleIndex         Integer32,
    hartAiModuleUnitName      DisplayString,
    hartAiModuleSlotNum       Integer32,
    hartAiModelName           DisplayString,
    hartAiSerialNumber        DisplayString,
    hartAiFirmwareVersion     DisplayString,
    hartAiFirmwareBuildDate   DisplayString,
    hartAiModuleState         Integer32,
    hartAiLoopPowerLoss       Integer32
}

-- 1.3.6.1.4.1.8691.10.6500.22.2.1.1
hartAiModuleIndex OBJECT-TYPE
    SYNTAX Integer32 (0..511)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "HART AI - Module index"
    ::= { hartAiModuleEntry 1 }

-- 1.3.6.1.4.1.8691.10.6500.22.2.1.2
hartAiModuleUnitName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "HART AI - unit name (E0, E1, E2, E3, E4)"
    ::= { hartAiModuleEntry 2 }

-- 1.3.6.1.4.1.8691.10.6500.22.2.1.3
hartAiModuleSlotNum OBJECT-TYPE
    SYNTAX Integer32 (0..63)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "HART AI - slot number (1, 2, 3, ...)"
    ::= { hartAiModuleEntry 3 }

-- 1.3.6.1.4.1.8691.10.6500.22.2.1.4
hartAiModelName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "HART AI - Model Name"
    ::= { hartAiModuleEntry 4 }

-- 1.3.6.1.4.1.8691.10.6500.22.2.1.5
hartAiSerialNumber OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "HART AI - Serial Number"
    ::= { hartAiModuleEntry 5 }

-- 1.3.6.1.4.1.8691.10.6500.22.2.1.6
hartAiFirmwareVersion OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "HART AI - firmware version"
    ::= { hartAiModuleEntry 6 }

-- 1.3.6.1.4.1.8691.10.6500.22.2.1.7
hartAiFirmwareBuildDate OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "HART AI - Firmware Build Date"
    ::= { hartAiModuleEntry 7 }

-- 1.3.6.1.4.1.8691.10.6500.22.2.1.8
hartAiModuleState OBJECT-TYPE
SYNTAX ModuleStateTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "HART AI - Module State"
    ::= { hartAiModuleEntry 8 }

-- 1.3.6.1.4.1.8691.10.6500.22.2.1.9
hartAiLoopPowerLoss OBJECT-TYPE
SYNTAX HartAiLoopPowerLossTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "HART AI - Loop Power loss"
    ::= { hartAiModuleEntry 9 }

-- 1.3.6.1.4.1.8691.10.6500.23
ao OBJECT IDENTIFIER
    ::= { ioPAC6500 23 }

-- 1.3.6.1.4.1.8691.10.6500.23.1
aoTable OBJECT-TYPE
    SYNTAX SEQUENCE OF AoEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "AO - table"
    ::= { ao 1 }

-- 1.3.6.1.4.1.8691.10.6500.23.1.1
aoEntry OBJECT-TYPE
    SYNTAX AoEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "AO - entry"
    INDEX { aoIndex }
    ::= { aoTable 1 }

AoEntry ::= SEQUENCE {
    aoIndex           Integer32,
    aoUnitName        DisplayString,
    aoSlotNum         Integer32,
    aoChannelNum      Integer32,
    aoMode            Integer32,
    aoValue           Integer32,
    aoDiagnosticError Integer32,
    aoWireBreak       Integer32,
    aoShortCircuit    Integer32
}

-- 1.3.6.1.4.1.8691.10.6500.23.1.1.1
aoIndex OBJECT-TYPE
    SYNTAX Integer32 (0..127)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "AO - index"
    ::= { aoEntry 1 }

-- 1.3.6.1.4.1.8691.10.6500.23.1.1.2
aoUnitName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "AO - unit name (E0, E1, E2, E3, E4)"
    ::= { aoEntry 2 }

-- 1.3.6.1.4.1.8691.10.6500.23.1.1.3
aoSlotNum OBJECT-TYPE
    SYNTAX Integer32 (0..63)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "AO - slot number (1, 2, 3, ...)"
    ::= { aoEntry 3 }

-- 1.3.6.1.4.1.8691.10.6500.23.1.1.4
aoChannelNum OBJECT-TYPE
    SYNTAX Integer32 (0..31)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "AO - channel number"
    ::= { aoEntry 4 }

-- 1.3.6.1.4.1.8691.10.6500.23.1.1.5
aoMode OBJECT-TYPE
    SYNTAX Integer32 (0..4)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "AO - mode {disable(0), 0-10 VDC(1), 1-5 VDC(2), 4-20mA(3), 0-20mA(4)}"
    ::= { aoEntry 5 }

-- 1.3.6.1.4.1.8691.10.6500.23.1.1.6
aoValue OBJECT-TYPE
    SYNTAX Integer32 (0..10000)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "AO - value"
    ::= { aoEntry 6 }

-- 1.3.6.1.4.1.8691.10.6500.23.1.1.7
aoDiagnosticError OBJECT-TYPE
SYNTAX DiagnosticErrorTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "AO - Diagnostic error"
    ::= { aoEntry 7 }

-- 1.3.6.1.4.1.8691.10.6500.23.1.1.8
aoWireBreak OBJECT-TYPE
SYNTAX WireBreakTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "AO - Wire break"
    ::= { aoEntry 8 }

-- 1.3.6.1.4.1.8691.10.6500.23.1.1.9
aoShortCircuit OBJECT-TYPE
SYNTAX ShortCircuitTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "AO - Short Circuit"
    ::= { aoEntry 9 }

-- 1.3.6.1.4.1.8691.10.6500.23.2
aoModuleTable OBJECT-TYPE
    SYNTAX SEQUENCE OF AoModuleEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "AO - Module table"
    ::= { ao 2 }

-- 1.3.6.1.4.1.8691.10.6500.23.2.1
aoModuleEntry OBJECT-TYPE
    SYNTAX AoModuleEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "AO - Module entry"
    INDEX { aoModuleIndex }
    ::= { aoModuleTable 1 }

AoModuleEntry ::= SEQUENCE {
    aoModuleIndex       Integer32,
    aoModuleUnitName    DisplayString,
    aoModuleSlotNum     Integer32,
    aoModelName         DisplayString,
    aoSerialNumber      DisplayString,
    aoFirmwareVersion   DisplayString,
    aoFirmwareBuildDate DisplayString,
    aoModuleState       Integer32
}

-- 1.3.6.1.4.1.8691.10.6500.23.2.1.1
aoModuleIndex OBJECT-TYPE
    SYNTAX Integer32 (0..511)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "AO - Module index"
    ::= { aoModuleEntry 1 }

-- 1.3.6.1.4.1.8691.10.6500.23.2.1.2
aoModuleUnitName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "AO - unit name (E0, E1, E2, E3, E4)"
    ::= { aoModuleEntry 2 }

-- 1.3.6.1.4.1.8691.10.6500.23.2.1.3
aoModuleSlotNum OBJECT-TYPE
    SYNTAX Integer32 (0..63)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "AO - slot number (1, 2, 3, ...)"
    ::= { aoModuleEntry 3 }

-- 1.3.6.1.4.1.8691.10.6500.23.2.1.4
aoModelName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "AO - Model Name"
    ::= { aoModuleEntry 4 }

-- 1.3.6.1.4.1.8691.10.6500.23.2.1.5
aoSerialNumber OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "AO - Serial Number"
    ::= { aoModuleEntry 5 }

-- 1.3.6.1.4.1.8691.10.6500.23.2.1.6
aoFirmwareVersion OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "AO - firmware version"
    ::= { aoModuleEntry 6 }

-- 1.3.6.1.4.1.8691.10.6500.23.2.1.7
aoFirmwareBuildDate OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "AO - Firmware Build Date"
    ::= { aoModuleEntry 7 }

-- 1.3.6.1.4.1.8691.10.6500.23.2.1.8
aoModuleState OBJECT-TYPE
SYNTAX ModuleStateTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "AO - Module State"
    ::= { aoModuleEntry 8 }

-- 1.3.6.1.4.1.8691.10.6500.41
serial OBJECT IDENTIFIER
    ::= { ioPAC6500 41 }

-- 1.3.6.1.4.1.8691.10.6500.41.1
serialTable OBJECT-TYPE
    SYNTAX SEQUENCE OF SerialEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Serial - table"
    ::= { serial 1 }

-- 1.3.6.1.4.1.8691.10.6500.41.1.1
serialEntry OBJECT-TYPE
    SYNTAX SerialEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Serial - entry"
    INDEX { serialIndex }
    ::= { serialTable 1 }

SerialEntry ::= SEQUENCE {
    serialIndex              Integer32,
    serialUnitName           DisplayString,
    serialSlotNum            Integer32,
    serialChannelNum         Integer32,
    serialMode               Integer32,
    serialTxCount            Gauge32,
    serialRxCount            Gauge32,
    serialTxTotalCount       Gauge32,
    serialRxTotalCount       Gauge32,
    serialFrameErrorCount    Gauge32,
    serialParityErrorCount   Gauge32,
    serialOverrunErrorCount  Gauge32,
    serialBreakErrorCount    Gauge32
}

-- 1.3.6.1.4.1.8691.10.6500.41.1.1.1
serialIndex OBJECT-TYPE
    SYNTAX Integer32 (0..127)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Serial - index"
    ::= { serialEntry 1 }

-- 1.3.6.1.4.1.8691.10.6500.41.1.1.2
serialUnitName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Serial - unit name (E0, E1, E2, E3, E4)"
    ::= { serialEntry 2 }

-- 1.3.6.1.4.1.8691.10.6500.41.1.1.3
serialSlotNum OBJECT-TYPE
    SYNTAX Integer32 (0..63)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Serial - slot number (1, 2, 3, ...)"
    ::= { serialEntry 3 }

-- 1.3.6.1.4.1.8691.10.6500.41.1.1.4
serialChannelNum OBJECT-TYPE
    SYNTAX Integer32 (0..31)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Serial - channel number"
    ::= { serialEntry 4 }

-- 1.3.6.1.4.1.8691.10.6500.41.1.1.5
serialMode OBJECT-TYPE
    SYNTAX Integer32 (0..2)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Serial - mode {RS-232(0), RS-422(1), RS-485-2W(2)}"
    ::= { serialEntry 5 }

-- 1.3.6.1.4.1.8691.10.6500.41.1.1.6
serialTxCount OBJECT-TYPE
    SYNTAX Gauge32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "serial - TxCount"
    ::= { serialEntry 6 }

-- 1.3.6.1.4.1.8691.10.6500.41.1.1.7
serialRxCount OBJECT-TYPE
    SYNTAX Gauge32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "serial - RxCount"
    ::= { serialEntry 7 }

-- 1.3.6.1.4.1.8691.10.6500.41.1.1.8
serialTxTotalCount OBJECT-TYPE
    SYNTAX Gauge32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "serial - TxTotalCount"
    ::= { serialEntry 8 }

-- 1.3.6.1.4.1.8691.10.6500.41.1.1.9
serialRxTotalCount OBJECT-TYPE
    SYNTAX Gauge32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "serial - RxTotalCount"
    ::= { serialEntry 9 }

-- 1.3.6.1.4.1.8691.10.6500.41.1.1.10
serialFrameErrorCount OBJECT-TYPE
    SYNTAX Gauge32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "serial - FrameErrorCount"
    ::= { serialEntry 10 }

-- 1.3.6.1.4.1.8691.10.6500.41.1.1.11
serialParityErrorCount OBJECT-TYPE
    SYNTAX Gauge32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "serial - ParityErrorCount"
    ::= { serialEntry 11 }

-- 1.3.6.1.4.1.8691.10.6500.41.1.1.12
serialOverrunErrorCount OBJECT-TYPE
    SYNTAX Gauge32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "serial - OverrunErrorCount"
    ::= { serialEntry 12 }

-- 1.3.6.1.4.1.8691.10.6500.41.1.1.13
serialBreakErrorCount OBJECT-TYPE
    SYNTAX Gauge32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "serial - BreakErrorCount"
    ::= { serialEntry 13 }

-- 1.3.6.1.4.1.8691.10.6500.41.2
serialModuleTable OBJECT-TYPE
    SYNTAX SEQUENCE OF SerialModuleEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Serial - Module table"
    ::= { serial 2 }

-- 1.3.6.1.4.1.8691.10.6500.41.2.1
serialModuleEntry OBJECT-TYPE
    SYNTAX SerialModuleEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Serial - Module entry"
    INDEX { serialModuleIndex }
    ::= { serialModuleTable 1 }

SerialModuleEntry ::= SEQUENCE {
    serialModuleIndex       Integer32,
    serialModuleUnitName    DisplayString,
    serialModuleSlotNum     Integer32,
    serialModelName         DisplayString,
    serialSerialNumber      DisplayString,
    serialFirmwareVersion   DisplayString,
    serialFirmwareBuildDate DisplayString,
    serialModuleState       Integer32
}

-- 1.3.6.1.4.1.8691.10.6500.41.2.1.1
serialModuleIndex OBJECT-TYPE
    SYNTAX Integer32 (0..511)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION "Serial - Module index"
    ::= { serialModuleEntry 1 }

-- 1.3.6.1.4.1.8691.10.6500.41.2.1.2
serialModuleUnitName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Serial - unit name (E0, E1, E2, E3, E4)"
    ::= { serialModuleEntry 2 }

-- 1.3.6.1.4.1.8691.10.6500.41.2.1.3
serialModuleSlotNum OBJECT-TYPE
    SYNTAX Integer32 (0..63)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Serial - slot number (1, 2, 3, ...)"
    ::= { serialModuleEntry 3 }

-- 1.3.6.1.4.1.8691.10.6500.41.2.1.4
serialModelName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Serial - Model Name"
    ::= { serialModuleEntry 4 }

-- 1.3.6.1.4.1.8691.10.6500.41.2.1.5
serialSerialNumber OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Serial - Serial Number"
    ::= { serialModuleEntry 5 }

-- 1.3.6.1.4.1.8691.10.6500.41.2.1.6
serialFirmwareVersion OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Serial - firmware version"
    ::= { serialModuleEntry 6 }

-- 1.3.6.1.4.1.8691.10.6500.41.2.1.7
serialFirmwareBuildDate OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Serial - Firmware Build Date"
    ::= { serialModuleEntry 7 }

-- 1.3.6.1.4.1.8691.10.6500.41.2.1.8
serialModuleState OBJECT-TYPE
SYNTAX ModuleStateTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "Serial - Module State"
    ::= { serialModuleEntry 8 }

-- 1.3.6.1.4.1.8691.10.6500.81
sysEventTrap OBJECT IDENTIFIER
    ::= { ioPAC6500 81 }

-- 1.3.6.1.4.1.8691.10.6500.81.1
pwrOn NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "PWR On"
    ::= { sysEventTrap 1 }

-- 1.3.6.1.4.1.8691.10.6500.81.2
pwrOff NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "PWR Off"
    ::= { sysEventTrap 2 }

-- 1.3.6.1.4.1.8691.10.6500.81.3
pwrFail NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "PWR Fail"
    ::= { sysEventTrap 3 }

-- 1.3.6.1.4.1.8691.10.6500.81.4
cpuUsageOverThreshold NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "CPU Usage Over Threshold"
    ::= { sysEventTrap 4 }

-- 1.3.6.1.4.1.8691.10.6500.81.5
cpuUsageUnderThreshold NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "CPU Usage Under Threshold"
    ::= { sysEventTrap 5 }

-- 1.3.6.1.4.1.8691.10.6500.81.6
ramUsageOverThreshold NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "RAM Usage Over Threshold"
    ::= { sysEventTrap 6 }

-- 1.3.6.1.4.1.8691.10.6500.81.7
ramUsageUnderThreshold NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "RAM Usage Under Threshold"
    ::= { sysEventTrap 7 }

-- 1.3.6.1.4.1.8691.10.6500.81.8
diskUsageOverThreshold NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Disk Usage Over Threshold"
    ::= { sysEventTrap 8 }

-- 1.3.6.1.4.1.8691.10.6500.81.9
diskUsageUnderThreshold NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Disk Usage Under Threshold"
    ::= { sysEventTrap 9 }

-- 1.3.6.1.4.1.8691.10.6500.82
hwEventTrap OBJECT IDENTIFIER
    ::= { ioPAC6500 82 }

-- 1.3.6.1.4.1.8691.10.6500.82.1
modulePlug NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Module Plug"
    ::= { hwEventTrap 1 }

-- 1.3.6.1.4.1.8691.10.6500.82.2
moduleRemove NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Module Unplug"
    ::= { hwEventTrap 2 }

-- 1.3.6.1.4.1.8691.10.6500.82.3
sdCardInsert NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "SD Card Insert"
    ::= { hwEventTrap 3 }

-- 1.3.6.1.4.1.8691.10.6500.82.4
sdCardRemove NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "SD Card Remove"
    ::= { hwEventTrap 4 }

-- 1.3.6.1.4.1.8691.10.6500.82.5
modeSwitchSetToRun NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Mode Switch Set to Run"
    ::= { hwEventTrap 5 }

-- 1.3.6.1.4.1.8691.10.6500.82.6
modeSwitchSetToStop NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Mode Switch Set to Stop"
    ::= { hwEventTrap 6 }

-- 1.3.6.1.4.1.8691.10.6500.82.7
modeSwitchSetToRemove NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Mode Switch Set to Remote"
    ::= { hwEventTrap 7 }

-- 1.3.6.1.4.1.8691.10.6500.82.8
resetButtonPush NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Reset Button Push"
    ::= { hwEventTrap 8 }

-- 1.3.6.1.4.1.8691.10.6500.83
configEventTrap OBJECT IDENTIFIER
    ::= { ioPAC6500 83 }

-- 1.3.6.1.4.1.8691.10.6500.83.1
configChangeSuccess NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Configuration Change Success"
    ::= { configEventTrap 1 }

-- 1.3.6.1.4.1.8691.10.6500.83.2
configChangeFailed NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Configuration Change Failed"
    ::= { configEventTrap 2 }

-- 1.3.6.1.4.1.8691.10.6500.83.3
timeChange NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Time Change"
    ::= { configEventTrap 3 }

-- 1.3.6.1.4.1.8691.10.6500.83.4
timeSyncByNTPServerSuccess NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Time Sync by NTP Server Success"
    ::= { configEventTrap 4 }

-- 1.3.6.1.4.1.8691.10.6500.83.5
timeSyncByNTPServerFailed NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Time Sync by NTP Server Failed"
    ::= { configEventTrap 5 }

-- 1.3.6.1.4.1.8691.10.6500.83.6
configIntegrityError NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Configuration Integrity Error"
    ::= { configEventTrap 6 }

-- 1.3.6.1.4.1.8691.10.6500.83.7
configImportSucess NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Configuration Import Success"
    ::= { configEventTrap 7 }

-- 1.3.6.1.4.1.8691.10.6500.83.8
configImportFailed NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Configuration Import Failed"
    ::= { configEventTrap 8 }

-- 1.3.6.1.4.1.8691.10.6500.83.9
configExportSuccess NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Configuration Export Success"
    ::= { configEventTrap 9 }

-- 1.3.6.1.4.1.8691.10.6500.83.10
configExportFailed NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Configuration Export Failed"
    ::= { configEventTrap 10 }

-- 1.3.6.1.4.1.8691.10.6500.83.11
configResetOriginDeviceSucess NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Configuration Reset Origin Device Success"
    ::= { configEventTrap 11 }

-- 1.3.6.1.4.1.8691.10.6500.83.12
configResetFactoryDefaultFailed NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Configuration Reset to Factory Default Failed"
    ::= { configEventTrap 12 }

-- 1.3.6.1.4.1.8691.10.6500.83.13
timeSyncByDNP3ServerSuccess NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Time Sync by DNP3 Server Success"
    ::= { configEventTrap 13 }

-- 1.3.6.1.4.1.8691.10.6500.83.14
timeSyncByDNP3ServerFailed NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Time Sync by DNP3 Server Failed"
    ::= { configEventTrap 14 }

-- 1.3.6.1.4.1.8691.10.6500.84
upgradeEventTrap OBJECT IDENTIFIER
    ::= { ioPAC6500 84 }

-- 1.3.6.1.4.1.8691.10.6500.84.1
fwrUpgradeSuccess NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "FWR Upgrade Success"
    ::= { upgradeEventTrap 1 }

-- 1.3.6.1.4.1.8691.10.6500.84.2
fwrUpgradeFailed NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "FWR Upgrade Failed"
    ::= { upgradeEventTrap 2 }

-- 1.3.6.1.4.1.8691.10.6500.85
userProgramEventTrap OBJECT IDENTIFIER
    ::= { ioPAC6500 85 }

-- 1.3.6.1.4.1.8691.10.6500.85.1
applicationRunSuccess NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Application Run Success"
    ::= { userProgramEventTrap 1 }

-- 1.3.6.1.4.1.8691.10.6500.85.2
applicationRunFailed NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Application Run Failed"
    ::= { userProgramEventTrap 2 }

-- 1.3.6.1.4.1.8691.10.6500.85.3
applicationStopSuccess NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Application Stop Success"
    ::= { userProgramEventTrap 3 }

-- 1.3.6.1.4.1.8691.10.6500.85.4
applicationStopFailed NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Application Stop Failed"
    ::= { userProgramEventTrap 4 }

-- 1.3.6.1.4.1.8691.10.6500.85.5
applicationDownloadSuccess NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Application Download Success"
    ::= { userProgramEventTrap 5 }

-- 1.3.6.1.4.1.8691.10.6500.85.6
applicationDownloadFailed NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Application Download Failed"
    ::= { userProgramEventTrap 6 }

-- 1.3.6.1.4.1.8691.10.6500.85.7
moduleTopologyMismatach NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Modules Topology Mismatch"
    ::= { userProgramEventTrap 7 }

-- 1.3.6.1.4.1.8691.10.6500.86
diagEventTrap OBJECT IDENTIFIER
    ::= { ioPAC6500 86 }

-- 1.3.6.1.4.1.8691.10.6500.86.1
ioModuleFieldCircuitSupplyLoss NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "I/O Module Field Circuit Supply Loss"
    ::= { diagEventTrap 1 }

-- 1.3.6.1.4.1.8691.10.6500.86.2
ioModuleLoopPower1Loss NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "I/O Module Loop Power Supply 1 Loss"
    ::= { diagEventTrap 2 }

-- 1.3.6.1.4.1.8691.10.6500.86.3
ioModuleLoopPower2Loss NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "I/O Module Loop Power Supply 2 Loss"
    ::= { diagEventTrap 3 }

-- 1.3.6.1.4.1.8691.10.6500.86.4
ioModuleDOCommonPowerLoss NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "I/O Module DO Common Power Loss"
    ::= { diagEventTrap 4 }

-- 1.3.6.1.4.1.8691.10.6500.86.5
ioModuleSystemPowerFailed NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "I/O Module System Power Fail"
    ::= { diagEventTrap 5 }

-- 1.3.6.1.4.1.8691.10.6500.86.6
ioModuleFieldPowerFailed NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "I/O Module Field Power Fail"
    ::= { diagEventTrap 6 }

-- 1.3.6.1.4.1.8691.10.6500.86.7
ioChannelWirebreak NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "I/O Channel Wirebreak"
    ::= { diagEventTrap 7 }

-- 1.3.6.1.4.1.8691.10.6500.86.8
ioChannelUnderflow NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "I/O Channel Underflow"
    ::= { diagEventTrap 8 }

-- 1.3.6.1.4.1.8691.10.6500.86.9
ioChannelUnderRange NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "I/O Channel Under Range"
    ::= { diagEventTrap 9 }

-- 1.3.6.1.4.1.8691.10.6500.86.10
ioChannelOverRange NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "I/O Channel Over Range"
    ::= { diagEventTrap 10 }

-- 1.3.6.1.4.1.8691.10.6500.86.11
ioChannelOverflow NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "I/O Channel Overflow"
    ::= { diagEventTrap 11 }

-- 1.3.6.1.4.1.8691.10.6500.86.12
ioChannelShortCircuit NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "I/O Channel Short Circuit"
    ::= { diagEventTrap 12 }

-- 1.3.6.1.4.1.8691.10.6500.87
protocolEventTrap OBJECT IDENTIFIER
    ::= { ioPAC6500 87 }

-- 1.3.6.1.4.1.8691.10.6500.87.1
dnp3OutStationConnect NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "DNP3 Outstation Connect"
    ::= { protocolEventTrap 1 }

-- 1.3.6.1.4.1.8691.10.6500.87.2
dnp3OutStationDisconnect NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "DNP3 Outstation Disconnect"
    ::= { protocolEventTrap 2 }

-- 1.3.6.1.4.1.8691.10.6500.87.3
dnp3OutStationRun NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "DNP3 Outstation Run"
    ::= { protocolEventTrap 3 }

-- 1.3.6.1.4.1.8691.10.6500.87.4
dnp3OutStationStop NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "DNP3 Outstation Stop"
    ::= { protocolEventTrap 4 }

-- 1.3.6.1.4.1.8691.10.6500.87.5
dnp3OutStaCfgChgOK NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "DNP3 Outstation Config Change Success"
    ::= { protocolEventTrap 5 }

-- 1.3.6.1.4.1.8691.10.6500.87.6
dnp3OutStationConfigChangeFailed NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "DNP3 Outstation Config Change Failed"
    ::= { protocolEventTrap 6 }

-- 1.3.6.1.4.1.8691.10.6500.87.7
dnp3OutStationDisable NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "DNP3 Outstation Disable"
    ::= { protocolEventTrap 7 }

-- 1.3.6.1.4.1.8691.10.6500.87.8
dnp3OutStationError NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "DNP3 Outstation Error"
    ::= { protocolEventTrap 8 }

-- 1.3.6.1.4.1.8691.10.6500.87.9
opcuaConnect NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "OPCUA Connect"
    ::= { protocolEventTrap 9 }

-- 1.3.6.1.4.1.8691.10.6500.87.10
opcuaDisconnect NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "OPCUA Disconnect"
    ::= { protocolEventTrap 10 }

-- 1.3.6.1.4.1.8691.10.6500.87.11
opcuaRun NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "OPCUA Run"
    ::= { protocolEventTrap 11 }

-- 1.3.6.1.4.1.8691.10.6500.87.12
opcuaStop NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "OPCUA Stop"
    ::= { protocolEventTrap 12 }

-- 1.3.6.1.4.1.8691.10.6500.87.13
opcuaConfigChangeSuccess NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "OPCUA Config Change Success"
    ::= { protocolEventTrap 13 }

-- 1.3.6.1.4.1.8691.10.6500.87.14
opcuaConfigChangeFailed NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "OPCUA Config Change Failed"
    ::= { protocolEventTrap 14 }

-- 1.3.6.1.4.1.8691.10.6500.87.15
opcuaDisable NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "OPCUA Disable"
    ::= { protocolEventTrap 15 }

-- 1.3.6.1.4.1.8691.10.6500.87.16
opcuaError NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "OPCUA Error"
    ::= { protocolEventTrap 16 }

-- 1.3.6.1.4.1.8691.10.6500.87.17
modbusMasterCommandRecovered NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Modbus Master Command Recover"
    ::= { protocolEventTrap 17 }

-- 1.3.6.1.4.1.8691.10.6500.87.18
modbusMasterCommandFailed NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Modbus Master Command Fail"
    ::= { protocolEventTrap 18 }

-- 1.3.6.1.4.1.8691.10.6500.87.19
modbusMasterDeviceConnected NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Modbus Master Device Connected"
    ::= { protocolEventTrap 19 }

-- 1.3.6.1.4.1.8691.10.6500.87.20
modbusMasterDeviceDisconnected NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Modbus Master Device Disconnected"
    ::= { protocolEventTrap 20 }

-- 1.3.6.1.4.1.8691.10.6500.87.21
modbusMasterConfigUpdateSuccess NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Modbus Master Config Update Success"
    ::= { protocolEventTrap 21 }

-- 1.3.6.1.4.1.8691.10.6500.87.22
modbusMasterConfigUpdateFailed NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Modbus Master Config Update Failed"
    ::= { protocolEventTrap 22 }

-- 1.3.6.1.4.1.8691.10.6500.87.23
modbusSlaveInvalidFunction NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Modbus Slave Invalid Function"
    ::= { protocolEventTrap 23 }

-- 1.3.6.1.4.1.8691.10.6500.87.24
modbusSlaveDeviceConnected NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Modbus Slave Device Connected"
    ::= { protocolEventTrap 24 }

-- 1.3.6.1.4.1.8691.10.6500.87.25
modbusSlaveDeviceDisconnected NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Modbus Slave Device Disconnected"
    ::= { protocolEventTrap 25 }

-- 1.3.6.1.4.1.8691.10.6500.87.26
modbusSlaveConfigUpdateSuccess NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Modbus Slave Config Update Success"
    ::= { protocolEventTrap 26 }

-- 1.3.6.1.4.1.8691.10.6500.87.27
modbusSlaveConfigUpdateFailed NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Modbus Slave Config Update Failed"
    ::= { protocolEventTrap 27 }

-- 1.3.6.1.4.1.8691.10.6500.87.28
modbusRun NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Modbus Run"
    ::= { protocolEventTrap 28 }

-- 1.3.6.1.4.1.8691.10.6500.87.29
modbusStop NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Modbus Stop"
    ::= { protocolEventTrap 29 }

-- 1.3.6.1.4.1.8691.10.6500.87.30
modbusDisable NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Modbus Disable"
    ::= { protocolEventTrap 30 }

-- 1.3.6.1.4.1.8691.10.6500.87.31
modbusError NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Modbus Error"
    ::= { protocolEventTrap 31 }

-- 1.3.6.1.4.1.8691.10.6500.88
loginEventTrap OBJECT IDENTIFIER
    ::= { ioPAC6500 88 }

-- 1.3.6.1.4.1.8691.10.6500.88.1
loginSuccess NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Login Success"
    ::= { loginEventTrap 1 }

-- 1.3.6.1.4.1.8691.10.6500.88.2
loginFailed NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Login Failed"
    ::= { loginEventTrap 2 }

-- 1.3.6.1.4.1.8691.10.6500.88.3
logoutSuccess NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Logout Success"
    ::= { loginEventTrap 3 }

-- 1.3.6.1.4.1.8691.10.6500.88.4
logoutFailed NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Logout Failed"
    ::= { loginEventTrap 4 }

-- 1.3.6.1.4.1.8691.10.6500.88.5
remRADIUSSrvConnOK NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Remote RADIUS Server Connection Success"
    ::= { loginEventTrap 5 }

-- 1.3.6.1.4.1.8691.10.6500.88.6
remRADIUSSrvConnFail NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Remote RADIUS Server Connection Failed"
    ::= { loginEventTrap 6 }

-- 1.3.6.1.4.1.8691.10.6500.88.7
remTACACSSrvConnOK NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Remote TACACS+ Server Connection Success"
    ::= { loginEventTrap 7 }

-- 1.3.6.1.4.1.8691.10.6500.88.8
remTACACSSrvConnFail NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Remote TACACS+ Server Connection Failed"
    ::= { loginEventTrap 8 }

-- 1.3.6.1.4.1.8691.10.6500.88.9
remLDAPSrvConnOK NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Remote LDAP Server Connection Success"
    ::= { loginEventTrap 9 }

-- 1.3.6.1.4.1.8691.10.6500.88.10
remoteLDAPServerConnectionFailed NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Remote LDAP Server Connection Failed"
    ::= { loginEventTrap 10 }

-- 1.3.6.1.4.1.8691.10.6500.88.11
lockSuccess NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Lock Success"
    ::= { loginEventTrap 11 }

-- 1.3.6.1.4.1.8691.10.6500.88.12
lockFailed NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Lock Failed"
    ::= { loginEventTrap 12 }

-- 1.3.6.1.4.1.8691.10.6500.89
accountEventTrap OBJECT IDENTIFIER
    ::= { ioPAC6500 89 }

-- 1.3.6.1.4.1.8691.10.6500.89.1
accountCreateSuccess NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Account Create Success"
    ::= { accountEventTrap 1 }

-- 1.3.6.1.4.1.8691.10.6500.89.2
accountCreateFailed NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Account Create Failed"
    ::= { accountEventTrap 2 }

-- 1.3.6.1.4.1.8691.10.6500.89.3
accountDeleteSuccess NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Account Delete Success"
    ::= { accountEventTrap 3 }

-- 1.3.6.1.4.1.8691.10.6500.89.4
accountDeleteFailed NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Account Delete Failed"
    ::= { accountEventTrap 4 }

-- 1.3.6.1.4.1.8691.10.6500.89.5
accountActivateSuccess NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Account Activate Success"
    ::= { accountEventTrap 5 }

-- 1.3.6.1.4.1.8691.10.6500.89.6
accountActivateFailed NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Account Activate Failed"
    ::= { accountEventTrap 6 }

-- 1.3.6.1.4.1.8691.10.6500.89.7
accountDeactivateSuccess NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Account Deactivate Success"
    ::= { accountEventTrap 7 }

-- 1.3.6.1.4.1.8691.10.6500.89.8
accountDeactivateFailed NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Account Deactivate Failed"
    ::= { accountEventTrap 8 }

-- 1.3.6.1.4.1.8691.10.6500.89.9
accountSetModOK NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Account Setting Modify Success"
    ::= { accountEventTrap 9 }

-- 1.3.6.1.4.1.8691.10.6500.89.10
accountSettingModificationFailed NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Account Setting Modify Failed"
    ::= { accountEventTrap 10 }

-- 1.3.6.1.4.1.8691.10.6500.89.11
accountPasswordExpirationWarning NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Account Password Expiration Warning"
    ::= { accountEventTrap 11 }

-- 1.3.6.1.4.1.8691.10.6500.90
rbacEventTrap OBJECT IDENTIFIER
    ::= { ioPAC6500 90 }

-- 1.3.6.1.4.1.8691.10.6500.90.1
roleCreateSuccess NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Role Create Success"
    ::= { rbacEventTrap 1 }

-- 1.3.6.1.4.1.8691.10.6500.90.2
roleCreateFailed NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Role Create Failed"
    ::= { rbacEventTrap 2 }

-- 1.3.6.1.4.1.8691.10.6500.90.3
roleDeleteSuccess NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Role Delete Success"
    ::= { rbacEventTrap 3 }

-- 1.3.6.1.4.1.8691.10.6500.90.4
roleDeleteFailed NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Role Delete Failed"
    ::= { rbacEventTrap 4 }

-- 1.3.6.1.4.1.8691.10.6500.90.5
privilegeOfARoleModOK NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Privilege of a Role Modify Success"
    ::= { rbacEventTrap 5 }

-- 1.3.6.1.4.1.8691.10.6500.90.6
privilegeOfARoleModFail NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Privilege of a Role Modify Failed"
    ::= { rbacEventTrap 6 }

-- 1.3.6.1.4.1.8691.10.6500.90.7
accessViolation NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Access Violation(Permission Denied)"
    ::= { rbacEventTrap 7 }

-- 1.3.6.1.4.1.8691.10.6500.91
logEventTrap OBJECT IDENTIFIER
    ::= { ioPAC6500 91 }

-- 1.3.6.1.4.1.8691.10.6500.91.1
logClearSuccess NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Event Log Clear Success"
    ::= { logEventTrap 1 }

-- 1.3.6.1.4.1.8691.10.6500.91.2
logClearFailed NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Event Log Clear Failed"
    ::= { logEventTrap 2 }

-- 1.3.6.1.4.1.8691.10.6500.91.3
logOverThreshold NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Event Log Over the Threshold of Storage Capacity"
    ::= { logEventTrap 3 }

-- 1.3.6.1.4.1.8691.10.6500.92
certificateKeyEventTrap OBJECT IDENTIFIER
    ::= { ioPAC6500 92 }

-- 1.3.6.1.4.1.8691.10.6500.92.1
certPrivKeyGenOK NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Certificate & Private Key Generate Success"
    ::= { certificateKeyEventTrap 1 }

-- 1.3.6.1.4.1.8691.10.6500.92.2
certPrivKeyGenFail NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Certificate & Private Key Generate Failed"
    ::= { certificateKeyEventTrap 2 }

-- 1.3.6.1.4.1.8691.10.6500.92.3
certPrivKeyImpOK NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Certificate & Private Key Import Success"
    ::= { certificateKeyEventTrap 3 }

-- 1.3.6.1.4.1.8691.10.6500.92.4
certPrivKeyImpFail NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Certificate & Private Key Import Failed"
    ::= { certificateKeyEventTrap 4 }

-- 1.3.6.1.4.1.8691.10.6500.92.5
certificateExpireinNDays NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Certificate Expire in N Days"
    ::= { certificateKeyEventTrap 5 }

-- 1.3.6.1.4.1.8691.10.6500.92.6
certificateRevoked NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Certificate Revoked"
    ::= { certificateKeyEventTrap 6 }

-- 1.3.6.1.4.1.8691.10.6500.92.7
caCertificateImportSuccess NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "CA Certificate Import Success"
    ::= { certificateKeyEventTrap 7 }

-- 1.3.6.1.4.1.8691.10.6500.92.8
caCertificateImportFailed NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "CA Certificate Import Failed"
    ::= { certificateKeyEventTrap 8 }

-- 1.3.6.1.4.1.8691.10.6500.92.9
httpsCertificateKeySetSuccess NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "HTTPS Certificate & Key Set Success"
    ::= { certificateKeyEventTrap 9 }

-- 1.3.6.1.4.1.8691.10.6500.92.10
httpsCertificateKeySetFailed NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "HTTPS Certificate & Key Set Failed"
    ::= { certificateKeyEventTrap 10 }

-- 1.3.6.1.4.1.8691.10.6500.92.11
httpsCertificateKeyClearSuccess NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "HTTPS Certificate & Key Clear Success"
    ::= { certificateKeyEventTrap 11 }

-- 1.3.6.1.4.1.8691.10.6500.92.12
httpsCertificateKeyClearFailed NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "HTTPS Certificate & Key Clear Failed"
    ::= { certificateKeyEventTrap 12 }

-- 1.3.6.1.4.1.8691.10.6500.92.13
ideCertificateKeySetSuccess NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "IDE comm Certificate & Key Set Success"
    ::= { certificateKeyEventTrap 13 }

-- 1.3.6.1.4.1.8691.10.6500.92.14
ideCertificateKeySetFailed NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "IDE comm Certificate & Key Set Failed"
    ::= { certificateKeyEventTrap 14 }

-- 1.3.6.1.4.1.8691.10.6500.92.15
ideCertificateKeyClearSuccess NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "IDE comm Certificate & Key Clear Success"
    ::= { certificateKeyEventTrap 15 }

-- 1.3.6.1.4.1.8691.10.6500.92.16
ideCertificateKeyClearFailed NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "IDE comm Certificate & Key Clear Failed"
    ::= { certificateKeyEventTrap 16 }

-- 1.3.6.1.4.1.8691.10.6500.92.17
syslogTLSCertKeySetOK NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Syslog Over TLS Certificate & Key Set Success"
    ::= { certificateKeyEventTrap 17 }

-- 1.3.6.1.4.1.8691.10.6500.92.18
syslogTLSCertificateKeySetFailed NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Syslog Over TLS Certificate & Key Set Failed"
    ::= { certificateKeyEventTrap 18 }

-- 1.3.6.1.4.1.8691.10.6500.92.19
syslogTLSCertKeyClearOK NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Syslog Over TLS Certificate & Key Clear Success"
    ::= { certificateKeyEventTrap 19 }

-- 1.3.6.1.4.1.8691.10.6500.92.20
syslogTLSCertKeyClearFail NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "Syslog Over TLS Certificate & Key Clear Failed"
    ::= { certificateKeyEventTrap 20 }

-- 1.3.6.1.4.1.8691.10.6500.92.21
radSecCertificateKeySetSuccess NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "RadSec Certificate & Key Set Success"
    ::= { certificateKeyEventTrap 21 }

-- 1.3.6.1.4.1.8691.10.6500.92.22
radSecCertificateKeySetFailed NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "RadSec Certificate & Key Set Failed"
    ::= { certificateKeyEventTrap 22 }

-- 1.3.6.1.4.1.8691.10.6500.92.23
radSecCertificateKeyClearSuccess NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "RadSec Certificate & Key Clear Success"
    ::= { certificateKeyEventTrap 23 }

-- 1.3.6.1.4.1.8691.10.6500.92.24
radSecCertificateKeyClearFailed NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "RadSec Certificate & Key Clear Failed"
    ::= { certificateKeyEventTrap 24 }

-- 1.3.6.1.4.1.8691.10.6500.92.25
ldapsCertificateKeySetSuccess NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "LDAPS Certificate & Key Set Success"
    ::= { certificateKeyEventTrap 25 }

-- 1.3.6.1.4.1.8691.10.6500.92.26
ldapsCertificateKeySetFailed NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "LDAPS Certificate & Key Set Failed"
    ::= { certificateKeyEventTrap 26 }

-- 1.3.6.1.4.1.8691.10.6500.92.27
ldapsCertificateKeyClearSuccess NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "LDAPS Certificate & Key Clear Success"
    ::= { certificateKeyEventTrap 27 }

-- 1.3.6.1.4.1.8691.10.6500.92.28
ldapsCertificateKeyClearFailed NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "LDAPS Certificate & Key Clear Failed"
    ::= { certificateKeyEventTrap 28 }

-- 1.3.6.1.4.1.8691.10.6500.92.29
openvpnCertificateKeySetSuccess NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "OpenVPN Client Certificate & Key Set Success"
    ::= { certificateKeyEventTrap 29 }

-- 1.3.6.1.4.1.8691.10.6500.92.30
openvpnCertificateKeySetFailed NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "OpenVPN Client Certificate & Key Set Failed"
    ::= { certificateKeyEventTrap 30 }

-- 1.3.6.1.4.1.8691.10.6500.92.31
openvpnCertKeyClearOK NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "OpenVPN Client Certificate & Key Clear Success"
    ::= { certificateKeyEventTrap 31 }

-- 1.3.6.1.4.1.8691.10.6500.92.32
openvpnCertificateKeyClearFailed NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "OpenVPN Client Certificate & Key Clear Failed"
    ::= { certificateKeyEventTrap 32 }

-- 1.3.6.1.4.1.8691.10.6500.92.33
mqttCertificateKeySetSuccess NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "MQTT Certificate & Key Set Success"
    ::= { certificateKeyEventTrap 33 }

-- 1.3.6.1.4.1.8691.10.6500.92.34
mqttCertificateKeySetFailed NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "MQTT Certificate & Key Set Failed"
    ::= { certificateKeyEventTrap 34 }

-- 1.3.6.1.4.1.8691.10.6500.92.35
mqttCertificateKeyClearSuccess NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "MQTT Certificate & Key Clear Success"
    ::= { certificateKeyEventTrap 35 }

-- 1.3.6.1.4.1.8691.10.6500.92.36
mqttCertificateKeyClearFailed NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "MQTT Certificate & Key Clear Failed"
    ::= { certificateKeyEventTrap 36 }

-- 1.3.6.1.4.1.8691.10.6500.92.37
opcuaCertificateKeySetSuccess NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "OPCUA Certificate & Key Set Success"
    ::= { certificateKeyEventTrap 37 }

-- 1.3.6.1.4.1.8691.10.6500.92.38
opcuaCertificateKeySetFailed NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "OPCUA Certificate & Key Set Failed"
    ::= { certificateKeyEventTrap 38 }

-- 1.3.6.1.4.1.8691.10.6500.92.39
opcuaCertificateKeyClearSuccess NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "OPCUA Certificate & Key Clear Success"
    ::= { certificateKeyEventTrap 39 }

-- 1.3.6.1.4.1.8691.10.6500.92.40
opcuaCertificateKeyClearFailed NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "OPCUA Certificate & Key Clear Failed"
    ::= { certificateKeyEventTrap 40 }

-- 1.3.6.1.4.1.8691.10.6500.92.41
estCaCertificateKeyEnrollSuccess NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "EST CA Certificate Enroll Success"
    ::= { certificateKeyEventTrap 41 }

-- 1.3.6.1.4.1.8691.10.6500.92.42
estCaCertificateKeyEnrollFailed NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "EST CA Certificate Enroll Failed"
    ::= { certificateKeyEventTrap 42 }

-- 1.3.6.1.4.1.8691.10.6500.92.43
estCertificateKeyEnrollSuccess NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "EST Certificate & Key Enroll Success"
    ::= { certificateKeyEventTrap 43 }

-- 1.3.6.1.4.1.8691.10.6500.92.44
estCertificateKeyEnrollFailed NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "EST Certificate & Key Enroll Failed"
    ::= { certificateKeyEventTrap 44 }

-- 1.3.6.1.4.1.8691.10.6500.92.45
sshKeyRegenerateSuccess NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "SSH Key re-Generate Success"
    ::= { certificateKeyEventTrap 45 }

-- 1.3.6.1.4.1.8691.10.6500.92.46
sshKeyRegenerateFailed NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "SSH Key re-Generate Failed"
    ::= { certificateKeyEventTrap 46 }

-- 1.3.6.1.4.1.8691.10.6500.92.47
snmpv3KeyModificationSuccess NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "SNMP v3 Key Modify Success"
    ::= { certificateKeyEventTrap 47 }

-- 1.3.6.1.4.1.8691.10.6500.92.48
snmpv3KeyModificationFailed NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "SNMP v3 Key Modify Failed"
    ::= { certificateKeyEventTrap 48 }

-- 1.3.6.1.4.1.8691.10.6500.92.49
tacacsKeyModificationSuccess NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "TACACS+ Key Modify Success"
    ::= { certificateKeyEventTrap 49 }

-- 1.3.6.1.4.1.8691.10.6500.92.50
tacacsKeyModificationFailed NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "TACACS+ Key Modify Failed"
    ::= { certificateKeyEventTrap 50 }

-- 1.3.6.1.4.1.8691.10.6500.92.51
radiusKeyModificationSuccess NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "RADIUS Key Modify Success"
    ::= { certificateKeyEventTrap 51 }

-- 1.3.6.1.4.1.8691.10.6500.92.52
radiusKeyModificationFailed NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "RADIUS Key Modify Failed"
    ::= { certificateKeyEventTrap 52 }

-- 1.3.6.1.4.1.8691.10.6500.92.53
ldapKeyModificationSuccess NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "LDAP Key Modify Success"
    ::= { certificateKeyEventTrap 53 }

-- 1.3.6.1.4.1.8691.10.6500.92.54
ldapKeyModificationFailed NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "LDAPKey Modify Failed"
    ::= { certificateKeyEventTrap 54 }

-- 1.3.6.1.4.1.8691.10.6500.93
openvpnEventTrap OBJECT IDENTIFIER
    ::= { ioPAC6500 93 }

-- 1.3.6.1.4.1.8691.10.6500.93.1
openvpnEnableSuccess NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "OpenVPN Enable Success"
    ::= { openvpnEventTrap 1 }

-- 1.3.6.1.4.1.8691.10.6500.93.2
openvpnEnableFailed NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "OpenVPN Enable Failed"
    ::= { openvpnEventTrap 2 }

-- 1.3.6.1.4.1.8691.10.6500.93.3
openvpnDisableSuccess NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "OpenVPN Disable Success"
    ::= { openvpnEventTrap 3 }

-- 1.3.6.1.4.1.8691.10.6500.93.4
openvpnDisableFailed NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "OpenVPN Disable Failed"
    ::= { openvpnEventTrap 4 }

-- 1.3.6.1.4.1.8691.10.6500.93.5
openvpnActivateSuccess NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "OpenVPN Activate Success"
    ::= { openvpnEventTrap 5 }

-- 1.3.6.1.4.1.8691.10.6500.93.6
openvpnActivateFailed NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "OpenVPN Activate Failed"
    ::= { openvpnEventTrap 6 }

-- 1.3.6.1.4.1.8691.10.6500.93.7
openvpnDeactivateSuccess NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "OpenVPN Deactivate Success"
    ::= { openvpnEventTrap 7 }

-- 1.3.6.1.4.1.8691.10.6500.93.8
openvpnDeactivateFailed NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "OpenVPN Deactivate Failed"
    ::= { openvpnEventTrap 8 }

-- 1.3.6.1.4.1.8691.10.6500.93.9
openvpnConfigImportSuccess NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "OpenVPN Configuration Import Success"
    ::= { openvpnEventTrap 9 }

-- 1.3.6.1.4.1.8691.10.6500.93.10
openvpnConfigImportFailed NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "OpenVPN Configuration Import Failed"
    ::= { openvpnEventTrap 10 }

-- 1.3.6.1.4.1.8691.10.6500.93.11
openvpnConnectSuccess NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "OpenVPN Connect Success"
    ::= { openvpnEventTrap 11 }

-- 1.3.6.1.4.1.8691.10.6500.93.12
openvpnConnectFailed NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "OpenVPN Connect Failed"
    ::= { openvpnEventTrap 12 }

-- 1.3.6.1.4.1.8691.10.6500.93.13
openvpnDisconnectSuccess NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "OpenVPN Disconnect Success"
    ::= { openvpnEventTrap 13 }

-- 1.3.6.1.4.1.8691.10.6500.93.14
openvpnDisconnectFailed NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION "OpenVPN Disconnect Failed"
    ::= { openvpnEventTrap 14 }

-- 1.3.6.1.4.1.8691.10.6500.100
siConfiguration OBJECT IDENTIFIER
    ::= { ioPAC6500 100 }

-- 1.3.6.1.4.1.8691.10.6500.100.1
siConfigModuleGroupId OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "n/a"
    ::= { siConfiguration 1 }

-- 1.3.6.1.4.1.8691.10.6500.100.2
siConfigModuleSlotIndex OBJECT-TYPE
SYNTAX SiConfigModuleSlotIndexTC
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION "n/a"
    ::= { siConfiguration 2 }

END