

       		   MOXA Smartio/Industio Family Multi-port Serial Board
        
             	 Quick Installation Guide for Windows XP Embedded

                            		24/07/2008

		            		Copyright(C)2008 Moxa Inc.



	A. Importing Components to Database

	   1) Extract drivers to a directory, e.g. "C:\MoxaDriver".
	   2) Open the Component Database Manager.
	   3) Click on the tab "Database", "Import...", and then "..." buttons.
	      Navigate to directory "C:\MoxaDriver" and then choose
	      the MXSER.SLD file. Click on "Import" button. When it imports 
	      successfully, choose the MXSPORT.SLD file to import again. 
	   4) Close and exit the Component Database Manager.
	   
	B. Building a Run-Time Image
	
	   Assume you have your platform configuration already.
	
	   1) Open the Target Designer.
	   2) Choose a MOXA board component.
	      Double-Click on the MOXA board e.g. MOXA CB-108 Series (PC/104-PLUS)	      
	      
	      Hardware
	         |
	         |-Devices
	              |
	              |-Multi-port serial adapters
	                   |
	                   |-MOXA CB-108 Series (PC/104-PLUS)[Version 1.16,R2] 	
	             
	   3) Choose MOXA port components.
	      
	      **NOTE You have to select Port 0-15 components twice with the same
	             driver version.  
	      
	      Hardware
	         |
	         |-Devices
	              |
	              |-Ports(COM and LPT)
	                   |
	                   |-MOXA Port 0 [Version 1.16,R2]
	     			   |-MOXA Port 0 [Version 1.16,R2]
	     			   |		:
	     			   |		:
	                   |-MOXA Port 15 [Version 1.16,R2]
	     			   |-MOXA Port 15 [Version 1.16,R2]
	   
	   4) Check Dependencies
	   5) Build Target Image
	     			   		
	              